46- ENGLISHSettingsDigital zoom +Zoom in the images.Press ▲▼ to select [Digital zoom +]1)and then press the The On-Screen Menu disappears andz[D. zoom + ] appears.Press the 2)the image size and press ▲▼ ◄►tomove the image to the top/ bottom/left/ right of the screen.The Panning function can work only when thezimage is larger than the screen size. A projectedimage can be also zoomed in by pressing the or the Digital zoom -Zoom out the images.Press ▲▼ to select [Digital zoom -]1)and then press the The On-Screen Menu disappears andz[D. zoom - ]appears.Press the 2)out the image size.The projected image can be also zoomed outzby pressing the or the button.To exit the Digital zoom +/– mode, press any buttonexcept the , buttons.To return to the previous screen size, select a screensize from the Screen Size Adjustment Menu or selectan input source from the Input Source Selection Menu(Æpage 36) again, or adjust the screen size with the buttons.NoteWhen input computer signal to the projector, this functionzwill be available.[Digital zoom +/-] cannot be selected when [True] iszselected in the [Screen] menu.[Digital zoom -] cannot be selected when [Custom] iszselected in the [Screen] menu.[Digital zoom +/–]are disabled and cannot be displayedzwhen [480i], [576i], [480p], [576p], [720p], [1035i] or[1080i] is selected in the PC System Menu (Æpage 36).KeystoneThis function is used to adjust keystone distortion ofthe projected image.Press ▲▼ to select [Keystone].1)Press ► or the 2)Press ▲▼ to choose the item you3)want to adjust.KeystoneTo correct keystone distortionStoreTo store or reset the keystonecorrectionThe following items are thesubmenu of [Store].StoreKeep the keystone correctioneven when the AC power cord isunplugged.ResetRelease the keystone correctionwhen turn off the projector.CeilingThis function is used to project the image from aceiling-mounted projector.Press ▲▼ to select [Ceiling] and then1)press the Press ▲▼ to change the image.2)When this function is set to [On], the picture willzbe top/bottom and left/right reversed.RearThis function is used to project the image from rear ofthe screen.Press ▲▼ to select [Rear] and then1)press the Press ▲▼ to change the image.2)When this function is set to [On], the picture willzbe left/right reversed.ResetTo reset the adjusted data, all adjustments will returnto their previous figures.Press ▲▼ to select [Reset] and thenpress the A confirmation box appears and then selectz[Yes].Screen
