Image adjust42- ENGLISHSettingsSelect [Image adjust] from the Main Menu (see“Navigating through the menu” on page 33),then select the item from the sub-menu.Remote ControlControl PanelContrastPress ▲▼ to select [Contrast].1)Press the 2)the adjustment dialog box.Press ◄► to adjust the setting value.3)OperationAdjustmentAdjustmentrangePress ►.increase the contrastMaximumvalue 63Press ◄.decrease thecontrastMinimumvalue 0BrightnessPress ▲▼ to select [Brightness].1)Press the 2)the adjustment dialog box.Press ◄► to adjust the setting value.3)OperationAdjustmentAdjustmentrangePress ►.increase thebrightnessMaximumvalue 63Press ◄.decrease thebrightnessMinimumvalue 0ColorPress ▲▼ to select [Color].1)Press the 2)the adjustment dialog box.Press ◄► to adjust the setting value.3)OperationAdjustmentAdjustmentrangePress ►.increase theintensity of the colorMaximumvalue 63Press ◄.decrease theintensity of the colorMinimumvalue 0NoteWhen input video signal to the projector, [Color] will bezavailable.TintPress ▲▼ to select [Tint].1)Press the 2)the adjustment dialog box.Press ◄► to adjust the tint value to3)get a proper color balance.Adjustments can be made betweenz0 and 63.NoteWhen you select [NTSC] or [NTSC4.43] in System menuzunder [Video input signal], [Tint] will be available.Color tempPress ▲▼ to select [Color temp.].1)Press the 2)the adjustment dialog box.Press ◄► to select the desired Color3)temp. level.You can select the desired Color temp. fromz[XLow], [Low], [Mid] or [High].Note[Color temp] level displays [Blackboard] or [Colorboard]zwhen the [Blackboard (Green)] or [Colorboard] isselected in the [Image select] menu.Image adjust