Setting48- ENGLISHSettingsAuto keystoneJAutoAlways works and corrects keystonedistortion according to the projector's tilt.ManualWorks only when pressing the SETUP> button on the remote control orthe control panel.OffDisables Auto Keystone.Note[Input search], [Auto PC adj.] and [Auto Keystone] cannotzbe set [Off] at the same time.The [Auto Keystone] function cannot work when thez[Ceiling feature] is set [On] in the [Screen] menu.BackgroundSelect the background screen for when no input signalis detected.Press ▲▼ to select [Background].1)Press the 2)Press ▲▼ to switch3)between eachoption as below.BlueBlue colored background.UserThe logo transferred by "LogoTransfer Software *1" is projected.BlackBlack colored background."Logo Transfer Software" is included on the*1:supplied CD-ROM.DisplayThis function decides whether to display On-ScreenDisplays.Press ▲▼ to select [Display].1)Press the 2)Press ▲▼ to switch3)between eachoption as below.OnShow all the On-Screendisplays *1CountdownoffShow the input image insteadof the countdown when turningon the projector *2OffHide the On-Screen Displays *3Use this function when you want to project*1:images after the lamp becomes bright enough.The [factory default setting] is in this option.Use this function when you want to project the*2:image as early as possible even when the lampis not bright enough.Hide the On-Screen Displays except;*3:● On-Screen Menu.● [Power off?]● [P-timer] display.● No signal for [Power management].● [Please wait ...]● Arrows for the [True] function in the [Screen]Menu.LogoThis function allows you to customize the screen logowith [Logo select], [Logo PIN code lock] and [LogoPIN code] change functions.Press ▲▼ to select [Logo].1)Press ► or the 2)Press ▲▼ to choose the desired item.3)Logo selectJThis function decides on the starting-up display fromamong following options.OffShow the countdown display only.DefaultShow the factory-set logo.UserThe logo transferred by "LogoTransfer Software *1" is projected."Logo Transfer Software" is included on the*1:supplied CD-ROM.Logo PIN code lockJThis function prevents an unauthorized person fromchanging the screen logo.OffThe screen logo can be changed freelyfrom the [Logo] Menu.ONThe screen logo cannot be changedwithout a [Logo PIN code].NoteIf you want to change the [Logo PIN code lock] setting,zpress the dialog box appears. Enter a [Logo PIN code] by followingthe steps below. The initial [Logo PIN code] is set to“4321” at the factory.
