ENGLISH - 19 Getting StartedSetting upProjection methodYou can use the projector with any of the following 4 projection methods. To set the desired method in the projector.J Mounting on the ceiling andprojecting forwardJ Setting on a desk/floor andprojecting from rear(Using translucent screen)J Mounting on the ceiling andprojecting from rear(Using translucent screen)J Setting on a desk/floor andprojecting forwardAttentionFor optimum viewing quality, install the projector in a location where screen exposure to outside light, light from light fixtureszor other light is at a minimum. Also draw the curtains, close blinds and turn off light fixtures.Do not use the projector installed vertically or tilted right or left. Use under such conditions could result in equipmentzdamage.The projector must be installed so that its inclination to the horizontal plane is ±30° or less.zInstalling the projector at an inclination that exceeds 30° may reduce product life orzresult in malfunction.Parts for ceiling mount (Optional)You can install the projector on the ceiling by using the optional ceiling mount bracket (ET-PKV100H: for highceiling, ET-PKV100S: for low ceiling), and the optional projector mount base ET-PKL100B.Use only the ceiling mount brackets specified for this projector.zRefer to the installation manual for the ceiling mount bracket when you install the bracket and the projector.zAttentionTo ensure projector performance and security, installation of the ceiling mount bracket must be carried by yourzdealer or a qualified technician.