Panasonic PT-LX26HE Operating Instructions Manual

Also see for PT-LW25HE: Operating instructions

Contents

Panasonic PT-LX26HE Operating Instructions Manual Manual pdf 52 page image

Setting52 - ENGLISHSettingsLogo PIN code changeJLogo PIN code can be changed to your desired four-digit number.Press ▲▼ to select [Logo PIN code1 )change].Press the button.Press ▲▼ to switch the item.2 )Computer 2 Computer inputMonitor out Monitor outAttention[Terminal] function is not available when selectingz[Computer 2] to the input source. Change the inputsource to the others (Computer 1 or Video) so that the[Terminal] function will be available.Power managementFor reducing power consumption as well asmaintaining the lamp life, the [Power management]function turns off the projection lamp when theprojector is not operated for a certain period.Press ▲▼ to select [Power1 )management].Press ► or the button to select one modeamong the items as below.Ready When the lamp has been fully cooleddown, the indicator changes to green blinking.In this condition, the projection lampwill be turned on if the input signalis reconnected or any button on thecontrol panel or remote control ispressed.ShutdownWhen the lamp has been fully cooleddown, the power will be turned off.Off [Power management] function is off.TimerJPress ▲▼ to select [Timer] and then1 )press the button.Press ▲▼ to switch between [On] and2 )[Off ].When this function is set to [On], the projectorzwill be automatically turned on just byconnecting the AC power cord to a wall outlet.Be sure to turn off the projector properly. If thezprojector is turned off in the incorrect sequence,the [Direct On] function does not work properly.Standby modeThis function can set the electric power when theprojector is standing by.Press ▲▼ to select [Standby mode]1 )and then press the / 76

Related manuals for Panasonic PT-LW25HE