Panasonic PT-LX26HE Operating Instructions Manual

Also see for PT-LW25HE: Operating instructions

Contents

Panasonic PT-LX26HE Operating Instructions Manual Manual pdf 29 page image

Powering ON/OFFENGLISH - 29 Basic OperationPress the <1 ) > button on the control panel orthe remote control, and Power off? appears onthe screen.Press the <2 ) > button on the control panel orthe remote control again to turn off the projector.The indicator starts toblink red, and the cooling fans keep running.At this time, you can unplug the AC power cordeven if the fans are still running.When the projector has cooled down enough, the3 ) indicator stops blinkingand you can turn on the projector.NoteDo not put the projector in a case before the projector iszcooled enough.While the <z STANDBY(R)/ON(G)> indicator is blinking,the lamp is being cooled down and the projector cannotbe turned on. Wait until the <STANDBY(R)/ON(G)>indicator stops blinking to turn on the projector again.The projector can be turned on after the <z STANDBY(R)/ON(G)> indicator turns red. The waiting time to restartwill be shortened when the normal power-off processingfor fan cooling is completed, compared with the time theAC power cord is immediately unplugged after the power-off.J Direct Power Off functionYou can disconnect the power cord from the walloutlet or turn off the breaker even during projectionwithout pressing the < > button.NoteWhen using the Direct power Off function, you canznot restart the projector immediately after the power isdisconnected. If the external power supply is suddenlycut off, the fans stop immediately. The lamp remains hightemperature and needs to be cooled.When the lamp has been cooled by the direct power offzfunction, it sometimes takes longer than usual for thelamp to light up again.Turning Off the ProjectorPower off? disappears after 4 seconds.