Panasonic PT-LZ370E Operating Instructions Manual

Contents

About your projectorENGLISH - 21 Preparation▶■ Control panel(1)(2)(3)(4)(1) Power buttonSets the projector to the standby mode when the POWER> switch on the projector is set to . Startsprojection when the projector power is off and in thestandby mode.(2) buttonDisplays the main menu.(3) buttonSwitches the input signal to project. ( page 40)(4) ▲▼◀▶ buttons/ button/ buttonUsed to operate the menu screen.Also used to enter the password for [SECURITY] or toenter characters.▶■ Connecting terminals(1) (2) (3) (4) (5) (6) (7) (8) (9)(1) terminalThis is a terminal to connect to the network.(2) / terminalsThis is a terminal to input the HDMI signal.(3) terminalThis is a terminal to input the RGB signal or the YCB C R /YPBPR signal.(4) terminalThis is a RS-232C compatible terminal to externally controlthe projector by connecting a computer.(5) terminalThis is a terminal to input the YCBC R signal or the YP BPRsignal.(6)

This is a terminal to input the video signal.(7) terminalThis is a terminal to input the S-video signal.(8)

This is a terminal to output the audio signal input to theprojector.(9)

This is a terminal to input the audio signal.Attentionz When a LAN cable is directly connected to the projector, the network connection must be made indoors.