Chapter 4 Settings — [DISPLAY OPTION] menu112 - ENGLISH5) Press qw to switch the item.f The items will switch each time you press the button.[DEFAULT] Standard setting.[SCREEN FIT] Changes the EDID data according to the [SCREEN FORMAT] setting.[USER] Set the [RESOLUTION] and [VERTICAL SCAN FREQUENCY] items as EDID.f Proceed to Step 10) when [DEFAULT] or [SCREEN FIT] is selected.6) Press the button.f The [RESOLUTION] screen is displayed.7) Press asqw to select [RESOLUTION].f Select [1024x768p], [1280x720p], [1280x768p], [1280x800p], [1280x1024p], [1366x768p], [1400x1050p],[1440x900p], [1600x900p], [1600x1200p], [1680x1050p], [1920x1080p], [1920x1080i], or [1920x1200p].8) Press the button.f The [VERTICAL SCAN FREQUENCY] screen is displayed.9) Press qw to select [VERTICAL SCAN FREQUENCY].f Select [60Hz], [50Hz], [30Hz], [25Hz], or [24Hz] when [1920x1080p] is selected for [RESOLUTION].f Select [60Hz], [50Hz], or [48Hz] when [1920x1080i] is selected for [RESOLUTION].f Select [60Hz] or [50Hz] when anything other than following is selected for [RESOLUTION].g [1920x1080p], [1920x1080i]10) Press the button.f The confirmation screen is displayed.11) Press qw to select [OK], and press the button.Notef The setting details are displayed in [RESOLUTION] and [VERTICAL SCAN FREQUENCY] of [EDID STATUS].f Setting of the resolution and the vertical scanning frequency may be necessary on the computer or video device in use.f The computer, video device, or projector in use may require the power to be turned off and on again after setting.f The output with the set resolution or vertical scanning frequency may not be possible depending on the computer or video device in use.[DIGITAL LINK IN]Set this item in accordance with the video signal input to the terminal.Setting [SIGNAL LEVEL] in [DIGITAL LINK IN]1) Press as to select [DIGITAL LINK IN].2) Press the button.f The [DIGITAL LINK IN] screen is displayed.3) Press as to select [SIGNAL LEVEL].4) Press qw to switch the item.f The items will switch each time you press the button.[AUTO] Automatically sets the signal level.[64-940] Select this item when the signal output from the HDMI terminal of an external device (Blu-ray discplayer, etc.) is input to the terminal via a twisted-pair-cable transmitter.[0-1023]Select this item when the signal output from the DVI-D terminal or HDMI terminal of an externaldevice (such as a computer) is input to the terminal via a twisted-pair-cabletransmitter.Notef The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of theexternal device regarding the output of the external device.f The signal level is displayed for 30 bits of input.
