Panasonic PT-RZ120BEJ Operating Instructions Manual

Also see for PT-RZ120: Operating instructions Operating instructions

Chapter 4 Settings — [DISPLAY OPTION] menuENGLISH - 1174) Press qw to switch the item.f The items will switch each time you press the button.[ON] Displays the input guide.[OFF] Hides the input guide.Setting [WARNING MESSAGE]Set the display/hide of the warning message.1) Press as to select [ON-SCREEN DISPLAY].2) Press the button.f The [ON-SCREEN DISPLAY] screen is displayed.3) Press as to select [WARNING MESSAGE].4) Press qw to switch the item.f The items will switch each time you press the button.[ON] Displays the warning message.[OFF] Hides the warning message.Notef If [OFF] is set, the warning message will not be displayed on the projected image even when warning condition such as [TEMPERATUREWARNING] is detected while using the projector. Also, the following countdown message is not displayed: the message until the poweris turned off after the no signal lights-out function is executed; the message until the light source is turned off after the no signal lights-outfunction is executed[MENU MODE]Set the display mode of the menu screen (OSD).1) Press as to select [MENU MODE].2) Press qw to switch the item.f The items will switch each time you press the button.[NORMAL] Displays all menu items.[SIMPLE] Displays some of the menu items that are used for basic setting or adjustment.Notef For the menu items that are displayed when [SIMPLE] is set, refer to “Main menu” (x page 78) and “Sub-menu” (x page 79).[IMAGE ROTATION]Set whether to rotate the input image when projecting.1) Press as to select [IMAGE ROTATION].2) Press qw to select an item.f The items will switch each time you press the button.[OFF] Projects the input image without rotating.[CLOCKWISE] Rotates the input image by 90° clockwise and project it.[COUNTERCLOCKWISE] Rotates the input image by 90° counterclockwise and project it.Notef The on-screen display direction does not change even when this item is set to anything other than [OFF]. Set the [DISPLAY OPTION] menu→ [ON-SCREEN DISPLAY] → [OSD ROTATION] as required.