Chapter 4 Settings — [PICTURE] menu84 - ENGLISHAdjusting desired white balance1) Press as to select [COLOR TEMPERATURE].2) Press qw or the button.f The [COLOR TEMPERATURE] individual adjustment screen is displayed.3) Press qw to select [USER1] or [USER2].4) Press the button.f The [COLOR TEMPERATURE] screen is displayed.5) Press as to select [WHITE BALANCE].6) Press the button.f The [WHITE BALANCE] screen is displayed.7) Press as to select [WHITE BALANCE HIGH] or [WHITE BALANCE LOW].8) Press the button.f The [WHITE BALANCE HIGH] screen or the [WHITE BALANCE LOW] screen is displayed.9) Press as to select [RED], [GREEN], or [BLUE].10) Press qw to adjust the level.Item Operation Adjustment Range of adjustment[RED] Press w. Deepens red.[WHITE BALANCE HIGH]: 0 - +255 (factory default is+255)[WHITE BALANCE LOW]: - 127 - +127 (factory default is0)Press q. Weakens red.[GREEN] Press w. Deepens green.Press q. Weakens green.[BLUE] Press w. Deepens blue.Press q. Weakens blue.Notef Adjust [COLOR TEMPERATURE] correctly. All colors will not be displayed properly unless adequate adjustment is made. If the adjustmentdoes not look suitable, you can press the button on the remote control to return the setting for the selected item only to thefactory default setting.Adjusting to desired white balance based on existing color temperature settings1) Press as to select [COLOR TEMPERATURE].2) Press qw or the button.f The [COLOR TEMPERATURE] individual adjustment screen is displayed.3) Press qw to select anything other than [DEFAULT], [USER1], or [USER2].4) Press the button.f The [CHANGE TO *****] screen is displayed.5) Press as to select [USER1] or [USER2].f The status of the color temperature changed is saved to the selected item.6) Press the button.f The confirmation screen is displayed.7) Press qw to select [OK], and press the button.f The [USER1] or [USER2] data is overwritten.f The data is not overwritten when [CANCEL] is selected with qw and the button is pressed.f The [WHITE BALANCE HIGH] screen is displayed.8) Press as to select [RED], [GREEN], or [BLUE].9) Press qw to adjust the level.
