Panasonic PT-RZ120BEJ Operating Instructions Manual

Also see for PT-RZ120: Operating instructions Operating instructions

Chapter 3 Basic Operations — Projecting70 - ENGLISHNotef The projected image size and scale shown on the periphery focus adjustment ring are an approximate guide.f Set the [PROJECTOR SETUP] menu → [LENS] → [LENS TYPE] to [ET-DLE035] when using the Fixed-focus Lens (Model No.:ET-DLE035).Setting the lens typeIf the projection lens is replaced, confirm the [LENS TYPE] setting. Change the setting if the type does not matchthe projection lens attached to the projector.1) Press the button.f The [MAIN MENU] screen is displayed.2) Press as to select [PROJECTOR SETUP].3) Press the button.f The [PROJECTOR SETUP] screen is displayed.4) Press as to select [LENS].5) Press the button.f The [LENS] screen is displayed.6) Press as to select [LENS TYPE].7) Press qw to switch the item.f The items will switch each time you press the button.[NORMAL] Select this item when a projection lens anything other than the Fixed-focus Lens (Model No.:ET-DLE035) is used for projection.[ET-DLE035] Select this item when the Fixed-focus Lens (Model No.: ET-DLE035) is used for projection.Moving the projection lens to the home positionOperate in following procedure to move the projection lens to the home position.When operating from the main menu1) Press the button.f The [MAIN MENU] screen is displayed.2) Press as to select [PROJECTOR SETUP].3) Press the button.f The [PROJECTOR SETUP] screen is displayed.4) Press as to select [LENS].5) Press the button.f The [LENS] screen is displayed.6) Press as to select [LENS HOME POSITION].7) Press the button.f The confirmation screen is displayed.8) Press qw to select [OK], and press the button.f [PROGRESS] is displayed in the [HOME POSITION] screen, and the projection lens is moved to the originposition.Notef The projection lens is not moved to the correct home position when the [PROJECTOR SETUP] menu → [LENS] → [LENS TYPE] is setincorrectly. Change the setting if the type does not match the projection lens attached to the projector.f The home position does not match with the optical image center position.f The home position varies depending on the projection lens type. Refer to “Lens shift range” (x page 71) for details.f The home position of the Fixed-focus Lens (Model No.: ET-DLE035) may deviate from the designed position.