Panasonic Palmcorder PV-GS180 Operating Instructions Manual

Contents

Panasonic Palmcorder PV-GS180 Operating Instructions Manual Manual pdf 22 page image

Before using22LSQT09737 Press the joystick to determine the setting.ª To exit the menu screenPress the [MENU] button.ª To get back to the previous screenMove the joystick left.ª About the menu setting≥The menu screen does not appear duringrecording. And you cannot record when themenu screen appears.ª Operating with remote control(optional)The menu screen transition is the same as whenthe buttons on the main unit are used.1 Press the [MENU] button.2 Select a menu item.≥Use the direction buttons (3, 2, 1, 4) and[ENTER] button in place of the joystick on themain unit.3 Press the [MENU] button, to exit the menuscreen.Setting date and timeIf the screen shows the incorrect date/time, thenadjust it.≥Set to Tape Recording Mode or CardRecording Mode.1 Set [BASIC] >> [CLOCK SET] >> [YES].2 Move the joystick left or right in order toselect the item to be set. Then move thejoystick up or down to set the desired value.≥The year will change as follows:2000, 2001, ..., 2089, 2000, ...≥The 12-hour clock is used.3 Press the joystick to determine the setting.≥The clock function starts at [00] seconds.ª About date/time≥The date and time function are driven by abuilt-in lithium battery.≥Make sure to check the time before recordingbecause the built-in clock is not very accurate.ª Recharging the built-in lithium battery≥If [0] or [--] is indicated when the Camcorder isturned on, then the built-in lithium battery hasrun down. Connect the AC adaptor to theCamcorder or place the battery on theCamcorder, and the built-in lithium battery willbe recharged. Leave the Camcorder as is forapprox. 24 hours, and the battery will drive thedate and time for approx. 6 months. (Even if the[OFF/ON] switch is set to [OFF], the battery isstill being recharged.)2006