Panasonic Palmcorder PV-GS180 Operating Instructions Manual

Contents

Panasonic Palmcorder PV-GS180 Operating Instructions Manual Manual pdf 42 page image

Playback mode42LSQT0973Playback on TVImages recorded by this Camcorder can beplayed back on a TV.≥Insert a recorded tape into this Camcorder.1 Connect the Camcorder to a TV.≥Connect the Camcorder and the TV by usingthe AV cable 1.≥If the TV has an S-Video terminal, then alsoconnect an S-Video cable 2 (optional). AnS-video connection allows you to enjoy ahigher quality image.2 Turn on this Camcorder and set the modedial to the Tape Playback Mode.3 Select the input channel on the TV.4 Move the joystick up to select the [1/;]icon to start playback.≥The image and audio are output on the TV.5 Move the joystick down to select the [∫]icon to stop playback.≥Whenever plugging in the S-Video cable, plug inthe AV cable, too.≥Use the AC adaptor to avoid battery depletion.ª If the image or audio from thisCamcorder is not output on the TV≥Check that the plugs are inserted as far as theygo.≥Check the connected terminal.≥If the image does not appear on the TV even if[BASIC] >> [AV JACK] >> [OUT/Ë] are set,then set to [OUT]. (-60-)≥Check the TV’s input setting (input switch).(For more information, please read theoperating instructions for the TV.)ª To display the on-screen informationon the TVThe information displayed on the LCD monitor orthe viewfinder (operation icon, time code andmode indication, etc.), date and time can bedisplayed on the TV.(This operation is only available when usingthe remote control (optional).)1 Press the [EXT DISPLAY] button on theremote control (optional).≥Press the button again to erase the OSDinformation.Playing back card≥Set to Picture Playback Mode.1 Operate with joystick.E: Plays back the previous picture.D: Plays back the next picture.1/∫: Slide show (Plays back the still pictureson the card in order) start/stop≥While the data on a card is playing back, do notoperate the mode dial.≥When the access lamp is lit, do not insert orremove a card.≥It takes time to display the file depending on thenumber of pixels of the file.≥If you attempt to play back a file recorded in adifferent format or if file data is defective, thewhole display becomes bluish and the“UNPLAYABLE CARD” indication may appearas a warning.≥When playing back a file recorded on otherequipment, the date and time display is differentfrom when it was recorded.≥When playing back a picture recorded on otherequipment, its size and that of pictures recordedby this Camcorder may appear differently.1 2[VIDEO IN][AUDIO IN][S-VIDEO IN]AV/S-VIDEOPC