Panasonic Palmcorder PV-GS180 Operating Instructions Manual

Contents

Panasonic Palmcorder PV-GS180 Operating Instructions Manual Manual pdf 47 page image

Edit mode47LSQT0973Audio dubbingYou can add music or narration to the recordedcassette.≥Set to Tape Playback Mode.1 Insert an external microphone securely intothe [MIC] terminal as far as it will go.2 Find a scene that you want to add sound to,and press the [;] button on the remotecontrol.3 Press the [AUDIO DUB] button on theremote control to make audio dubbingready.4 Press the [;] button on the remote controlto start audio dubbing.≥Talk into the microphone.5 Press the [;] button on the remote controlto stop audio dubbing.≥If a tape has a non-recorded portion when thetape is dubbed, images and sounds may bedisturbed when this portion of the tape is playedback.ª Before recording with audio dubbing≥Set to Tape Recording Mode.≥When you want to preserve the original soundtaken during recording, set [SETUP] >>[AUDIO REC] >> [12bit] to take pictures. (Whenset [16bit], the sounds taken during recordingare erased after recording with audio dubbing.)≥Set [BASIC] >> [REC SPEED] >> [SP] to takepictures.ª To play back the sound recorded withaudio dubbingYou can switch between the sound recorded withaudio dubbing and the original sound.Set [SETUP] >> [12bit AUDIO] >> [ST2] or [MIX].[ST1]: It only plays back the original sound.[ST2]: It only plays back the sound added byaudio dubbing.[MIX]: It simultaneously plays back the originalsound and the sound added with audiodubbing.ª To dub audio while listening to apre-recorded sound≥When pausing the audio dubbing, set the[12bit AUDIO] on the [SETUP] Sub-Menu to[ST2] and you can check the pre-recordedsound.CAUTION:Unauthorized exchanging and/or copying ofcopyrighted recordings may be copyrightinfringement.MIC;A.DUB ;A.DUB ¥