Panasonic Palmcorder PV-GS180 Operating Instructions Manual

Contents

Panasonic Palmcorder PV-GS180 Operating Instructions Manual Manual pdf 46 page image

Edit mode46LSQT0973≥For more information, refer to the operatinginstructions for your TV set and recorder.≥When you do not need functional indications ordate and time indications, press the[EXT DISPLAY] button on the remote control forno indication. (When you connect theCamcorder and a recorder with the DV cable,these indications may not appear.)ª When neither image nor sound fromthe Camcorder is output to the TV set≥Check that the plugs are inserted as far as theygo.≥Check the connected terminal.≥When no image is presented on the TV even ifset [BASIC] >> [AV JACK] >> [OUT/Ë], set to[OUT]. (-60-)Using the DV cable for Recording(Digital Dubbing)By connecting other digital video equipment withDV terminal and the Camcorder by using the DVcable PV-DDC9/PV-DDC9-K (optional) 1,high-image-quality dubbing can be done in digitalformat.≥Set to Tape Playback Mode. (Player/recorder)1 Connect the Camcorder and digital videoequipment with the DV cable.2 Set [ADVANCE] >> [REC STDBY] >> [YES].(Recorder)≥You do not have to follow this step when theremote control is used in the digital dubbing.3 Start playback. (Player)4 Start recording. (Recorder)Move the joystick up to select [¥/;] icon.Or, while pressing the [¥REC] button on theremote control, press the [PLAY 1] button.5 Move the joystick up to select the [¥/;]icon again or press the [;] button on theremote control to stop recording.(Recorder)6 Stop playback. (Player)ª To cancel the standby for recordingWhen the Camcorder is in standby for recording,move the joystick down and select the [∫] icon.≥Do not plug or unplug the DV cable duringdubbing, or the dubbing may not be completedproperly.≥If a picture (bilingual video, etc.) containing mainsound and sub sound has been dubbed, selectthe desired sound using [SETUP] >>[AUDIO OUT] on playback.≥Even if you use a device equipped with DVterminals such as IEEE1394, you may not beable to perform digital dubbing in some cases.For more information, see the instructions forequipment connected.≥Regardless of the menu settings on therecorder, digital dubbing is carried out in thesame mode as the [AUDIO REC] mode of theplayback tape.≥The images on the recorder monitor may bedisturbed, but it does not affect the recordedimages.≥If a picture containing a copyright protectionsignal (copy guard) is recorded by theCamcorder, the picture is distorted bymosaic-like patterns at playback.≥Disconnect the USB cable since input signalsfrom the external input terminal cannot berecorded while it is connected with the USBcable.≥When wide images are input, the display suchas the menu screen or the operation icon isexpanded horizontally.≥While pictures are input from the DV terminal,the operation icon blinks on instead ofappearing from the side of the screen when youpress the center of the joystick.1DVDV