Panasonic Palmcorder PV-GS180 Operating Instructions Manual

Contents

Panasonic Palmcorder PV-GS180 Operating Instructions Manual Manual pdf 60 page image

Menu60LSQT0973Menus related to taking picturesª [DATE/TIME]This switches between date and time indications.≥The Camcorder automatically records the dateand time the picture was taken on the tape.≥You can also show or change the date/timeindication by repeatedly pressing the [DATE/TIME] button on the remote control.ª [AUDIO REC]Switches the audio (PCM audio) recordingsystems.[12bit]: Records audio in “12 bit 32 kHz 4 tracks”.(The original audio signals can be keptafter the other audio signals are dubbed.)[16bit]: Records audio in “16 bit 48 kHz 2 tracks”.Audio can be recorded in higher quality.(If audio signals are dubbed, then theoriginal audio signals will be erased.)ª [REC LAMP]Set to [ON] and this turns the recording lamp onduring recording, which indicates that recording isunderway. Set to [OFF] and this does not turn onthe lamp even when recording is underway.ª [DISPLAY]Set to [ON] and the display mode can be switchedto all functions. Set to [OFF] and it can beswitched to minimum display.ª [BEEP SOUND]Set to [ON] and confirmation/alarm beeps areissued as follows.1 Beep≥When you start recording≥When you turn on the power2 Beeps≥When you pause recording2 Beeps for 4 times≥When a cassette with its erasure prevention tabset to [SAVE] is inserted, condensation occurs,and at other times. Check the sentencedisplayed on the screen.Menus related to playbackª [AV JACK]This switches among the output settings of theAV/headphone terminal.[OUT/Ë]: Automatically switches between AVand headphone output.[OUT]: Use this setting when image or soundis not output normally to the TV in[OUT/Ë].≥When using the headphone, set to [SETUP] or[BASIC] >> [AV JACK] >> [OUT/Ë]. If set to[OUT], you may hear noises on the right.ª [REC DATA]Set to [ON] and the settings (shutter speed, iris/gain values, and white balance settings (-37-),etc.) used during the recordings are displayedduring playback.≥When the [AUTO/MANUAL/FOCUS] switch isset to [AUTO], the indication [AUTO] willappear.≥When there is no data, [---] appears on thedisplay.≥If the Camcorder data of the Camcorder areplayed back on other equipment, the settingsinformation is sometimes not displayednormally.ª [AUDIO OUT]This switches the sound to be played back.[STEREO]: Stereo sound (main sound and subsound)[L]: Left channel sound (main sound)[R]: Right channel sound (sub sound)