Installing Drivers and Software28The USB, printer, TWAIN driver and InteractivePanaboard Software are installed in your computerby following procedures.Note• Do not yet connect a USB cable to theelectronic board.1 Power on your computer and start Windows* 1.• Log on as an administrator for Windows 2000or Windows XP.* 1 Microsoft Windows operating system(hereafter Windows)2 Insert the CD-ROM into the CD-ROM drive.The Setup window appears automatically.• Depending on the operating system or thesettings that you are using, the Setupwindow may not appear automatically.In such a case, execute “Menu.exe” in theCD-ROM from the Explorer.3 When “Welcome” window appears, click[Next].4 Click [Interactive Panaboard Setup].• To install the Panasonic-DMS software, click[Panasonic-DMS] (see page 30).• To read the operating instructions in theprovided CD-ROM, the Adobe Reader orAcrobat Reader must be installed in yourcomputer. It can be downloaded from theAdobe's Web site if Internet is available.5 Click [Install Software].6 Read ”End-User License Agreement” carefullyand click [Yes].7 When the following window appears, checkthat the electronic board is not connected toyour computer and click [OK].• If the USB cable is connected to theelectronic board, remove it and click [OK].• For Windows 98 or Windows Me, a floppydisk or CD-ROM for installing the operatingsystem may be required .• If the screen prompts to restart Windows,restart Windows.Installing Drivers / InteractivePanaboard Software