Using the Panasonic-DMS72You can scan images on the screen to your computerby operating Panasonic-DMS.1 Click [Start], move the pointer to Programs–Panasonic–Panasonic DocumentManagement System–Document Manager.(For Windows XP, All Programs instead ofPrograms.)• The Panasonic-DMS software runs.2 Click the File menu, then click SelectSource....3 Select Panaboard UB-8 USB TWAIN Driverand click [Select].4 Click the File menu, then click AcquireImage..., or click the (scanner) icon on theToolbar.• The Panaboard Operation Panel appears.Note• If the Panasonic Interactive Software isstarted, the Panaboard Operation Panelcannot be displayed. Close the PanasonicInteractive Software and start it.• When the Panaboard Operation Panel is notdisplayed, check the USB cable connectionor the condition of the electronic board.5 Click the (Scan) button or the(2-Screen Scan) button.• Scanning starts and the scanned image willbe displayed on the screen of the computer.It is also possible to start scanning using the(Copy Key) or (2-Screen CopyKey) on the electronic board.6 Click [Close] on the Panaboard OperationPanel to finish scanning.• About the Document Manager, refer to theDocument Management System operatinginstructions in the CD-ROM.Note• Dragging the Panaboard Operation Panel usingthe mouse or activating other software programsduring scanning may cause scanning troubles.Using the Panasonic-DMSScanning