Panasonic Panaboard UB-8325 Operating Instructions Manual

Also see for Panaboard UB-8325:

Contents

Using the Panaboard in Projector Mode35Using■ Switching the ModeYou can freely switch the Projector mode and theWhiteboard mode while the Interactive PanaboardSoftware is running.1 Right-click the icon in the Taskbar andclick Select Mode... in the pop-up menu. Inaddition, you can double-click the icon in theTaskbar.• The Select Mode window appears.2 Click Projector or Whiteboard icon, and thenclick [OK].Note• When switching to the Projector mode, thecalibration screen will not be displayedautomatically after calibration endedcorrectly once. Calibrate if necessary.• When switching to the Whiteboard mode, theWhiteboard window will be displayed.■ Setting the Communication PortSpecifies the communication port to communicatewith the Interactive Panaboard.1 Right-click the icon in the Taskbar andclick Settings - Communication Port... in thepop-up menu.• The Communication Port window appears.2 Click [Start...] of the Auto Detection to detectthe communication port connected with theInteractive Panaboard automatically.3 Click [OK].Note• The COM Port can be selected for oldermodels of the Interactive Panaboard withoutUSB port.