Panasonic SC-HT892 Operating Instructions Manual

RQT880412Simple SetupConserving powerThe main unit consumes a small amount of power, even when it is turned off (approx. 0.9 W). To save power when the unit is not to be used for a longtime, unplug it from the household mains socket.You will need to reset some memory items after plugging in the main unit.[Note]The included AC mains lead is for use with this unit only. Do not use it with other equipment. Also, do not use cords for other equipment with this unit.STEP5 Radio and AC mains lead connectionsAdhesive tapeMain unitAM loop antennaStand the antenna up on its base.Place the antenna where reception is best.Keep loose antenna cable away from other wiresand cables.Click!AM loop antenna FM indoor antennaFM indoor antennaAffix this end of the antenna wherereception is best.≥ Connect the AC mains lead after all other connections are complete.≥ Using an outdoor antenna (optional) (➜ page 30).Re-tighten theterminal screw.Loosen the terminalscrew with a Phillips-head screwdriver.WhiteRed BlackWhile pushing, insert the wire fully.AC mains lead[Southeast[Asia,][the[Middle[East,[South[Africa,[[Saudi[Arabia[and[Kuwait[[Saudi[Arabia[and[Kuwait[AC mains leadTo household mains socketBefore connectingthe AC mains leadSet the voltage.Change the voltage selectorto the appropriate positionfor the area in which thissystem is used.[Saudi[Arabia[and[Kuwait[BE SURE TO READ THECAUTION FOR THE ACMAINS LEAD ON PAGE 4BEFORE CONNECTION.Radio and AC mains lead connections