Panasonic SC-HT892 Operating Instructions Manual

RQT880425 Using on-screen menus∫ Display Menu∫ Other MenuConfirming HDMI information[Note]≥ All possible types of output are displayed.≥ The current output for “Audio Stream”, “Video Format” and “Color Space (or Colour Space)” will be underlined.(If you select a video output without an “¢” mark in the “Video Output Mode” in Picture Menu, the selected video format will not be underlined.)≥ When “Off” is selected in “Audio Output” (➜ page 27, “HDMI” tab), “– – –” will be displayed in “Audio Stream” and “Max Channel”.Other Settings Items shown differ depending on the type of disc.Information [JPEG] On ,------. OffSubtitle Position 0 to s60 (in 2 unit steps)Subtitle Brightness Auto, 0 to s74:3 AspectTo select how to show images made for 4:3aspect screens on a 16:9 aspect televisionNormal: Laterally stretches images.Auto: Expands 4:3 letterbox images to fillmore of the screen. Other imagesappear in full in the center of thescreen.Shrink: Images appear in the center of thescreen.Zoom: Expands to 4:3 aspect ratio.If your television has a similar feature, use itinstead for a better effect.Just Fit ZoomTo select the appropriate screen size to fityour television screen[DVD-A] (Motion picture part)[DVD-VR] [DVD-V] [VCD]Auto, 4:3 Standard, European Vista,16:9 Standard, American Vista,Cinemascope1, Cinemascope2[MPEG4] [DivX]Standard (a0.25 full-screen),Original (actual recorded size),Full (full-screen)≥ This may not work depending on the discsrecording.16:9 Standard (16:9)4:3 Standard (4:3)European Vista (1.66:1)American Vista (1.85:1)Cinemascope1 (2.35:1)Cinemascope2 (2.55:1)e.g.Manual ZoomTo zoom in and out manually– in 0.01-unit steps from “k1.00” to “k1.60”– in 0.02-unit steps from “k1.60” to “k2.00”– in 0.05-unit steps from “k2.00” to “k4.00”([MPEG4] [DivX] only)≥ To change the steps more quickly, pressand hold [3, 4].≥ [MPEG4] [DivX] It may not be possible tozoom up to “k4.00” depending upon theconnected television and its settings.Bit Rate Display[DVD-A] (Motion picture part)[DVD-VR] [DVD-V] [VCD] [MPEG4] [DivX]On ,------. OffGUI See-through To make the on-screen menu transparentOff, On, AutoGUI Brightness To adjust the on-screen menu brightnesss3 to r3HDMI StatusIndicates various information when connectedwith HDMI AV OUT terminal.(➜ below, Confirming HDMI information)Setup (➜ page 26)Play as DVD-VideoorPlay as DVD-AudioTo play DVD-Video contents of DVD-AudioSelect “Play as DVD-Video”.Play as DVD-VR,Play as HighMATorPlay as Data DiscTo use functions for data discs (➜ page 19)(To play JPEG, MP3, MPEG4 or DivX videocontents on DVD-RAM, or to play a HighMATdisc without using HighMAT function)Select “Play as Data Disc”.HDMI Status-----HDMI is connected.HDMI InformationAudio StreamMax ChannelVideo FormatColor Space (or Colour Space)PCM2ch480p/576p/720p/1080iYCbCr (4:4:4)/YCbCr (4:2:2)/RGB [➜ page 24, HDMI Color Space(or HDMI Colour Space)]Connection statusShows the output signal type.Shows the number of audio channels.(➜ page 23, Video Output Mode)e.g.