Panasonic SC-HT892 Operating Instructions Manual

RQT880429 Using the radioUsing the radioUp to 15 stations can be set in each band, FM and AM.When a stereo FM broadcast is being received,“ST” lights in the display.∫ If noise is excessiveWhen “FM” is selectedPress and hold [—FM MODE] on the main unit todisplay “MONO”.Press and hold [—FM MODE] again to cancel the mode.≥ The mode is also canceled when you change the frequency.When “AM” is selectedPress [FUNCTIONS] on the remote control.Each time you press the button: BP 2()BP 1∫ Presetting the channelUp to 15 stations can be set in each band, FM and AM.1 While listening to the radio broadcastPress [ENTER].2 While the frequency and “PGM” are flashing on the displayPress the numbered buttons to select a channel.≥ To select a 2-digit numbere.g. To select 12:[S10] ➜ [1] ➜ [2]Alternatively, press [X, W], and then press [ENTER].The station occupying a channel is erased if another station ispreset to that channel.(Continued on next page)Presetting stations automatically1 Press [SELECTOR] to select “FM” or “AM”.2 Press [-TUNE MODE] to select “MANUAL”.Each time you press the button: MANUAL()PRESET3 Press [X TUNING W] to tune to the lowest frequency(FM: 87.50, AM: 522 or 520).4 Press and hold [MEMORY].Release the button when “FM AUTO” or “AM AUTO” is displayed.The tuner presets all the stations it can receive into the channels inascending order.≥ “SET OK” is displayed when the stations are set, and the radiotunes to the last preset station.≥ “ERROR” is displayed when automatic presetting is unsuccessful.Preset the channels manually (➜ right).MEMORYSELECTORTUNING-TUNE MODE / - FM MODEONE TOUCH PLAYA.SRNDENTERFUNCTIONSTUNER/BANDNumberedbuttonsMain unit onlySelecting the preset channels1 Press [TUNER/BAND] to select “FM” or “AM”.2 Press the numbered buttons to select the channel.≥ To select a 2-digit numbere.g. 12: [S10] ➜ [1] ➜ [2]Alternatively, press [X, W].Manual tuning1 Press [SELECTOR] to select “FM” or “AM”.2 Press [-TUNE MODE] to select “MANUAL”.3 Press [X TUNING W] to select the frequency.≥ To start automatic tuning, press and hold [X TUNING W] until thefrequency starts scrolling. Tuning stops when a station is found.DISC SFC TG D.MIX MONO SLPDEACPRGSASTH.BASSSRDPGMHDCDE.1WMONO STH.BASSSRDPGMHDCDE.1WMain unit onlyDISC SFC TG D.MIX MONO SLP