Panasonic SC-HT892 Operating Instructions Manual

RQT880423 Using on-screen menus∫ Play MenuThis works only when the elapsed play time can be displayed. It alsoworks with all JPEG content.∫ Picture Menu(Continued on next page)Other Settings Items shown differ depending on the type of disc.Play Speed[DVD-A] (Motion picture part) [DVD-VR] [DVD-V]To change play speed– from “k0.6” to “k1.4”≥ Press [1 PLAY] to return to normal play.≥ After you change the speed– Advanced Surround and Sound Enhancement haveno effect.– Audio output switches to 2-channel stereo.– Sampling frequency of 96 kHz is converted to48 kHz.≥ This function may not work depending on the disc’srecording.Repeat[DVD-VR]: Program>All>Off≥ During playlist play: Scene>Playlist>Off[DVD-A]: Track>Group§>Off[DVD-V]: Chapter>Title§>Off[VCD] [CD]: Track>All>Off[WMA] [MP3] [MPEG4] [DivX]: Content>Group§>Off[JPEG]: Group§>Off§ “All” is displayed during all group ([DVD-A]), programor random play.A-B RepeatExcept [JPEG] [DVD-VR] (Still picture part) [MPEG4] [DivX]To repeat a specified sectionPress [ENTER] at the starting and ending points.Press [ENTER] again to cancel.MarkerExcept [DVD-VR]To mark up to 5 positions to play againPress [ENTER] (The unit is now ready to acceptmarkers.)To mark a position:Press [ENTER] (at the desired point).To mark another position:Press [2, 1] to select “¢” ➜ Press [ENTER].To recall a marker:Press [2, 1] ➜ Press [ENTER].To erase a marker:Press [2, 1] ➜ Press [CANCEL].≥ This feature does not work during program andrandom play.≥ Markers you add are cleared when you open the disctray or switch the unit to standby.AdvancedDisc Review[DVD-VR] (Except still picture part)[DVD-V] (Except iR/iRW)Allows you to browse the disc contents and startplaying from the selected position. You can selecteither “Intro Mode” or “Interval Mode” in “AdvancedDisc Review” in the “Disc” tab (➜ page 26).When you find a title/program to playPress [1 PLAY].≥ This may not work depending on the disc and theplay position.≥ [DVD-VR] This does not work when playing a playlist(➜ page 20).PictureModeNormalCinema1: Mellows images and enhances detail indark scenes.Cinema2: Sharpens images and enhances detail indark scenes.Animation: Suitable for animation.Dynamic: Enhances the contrast for powerfulimages.User: Press [ENTER] to select “PictureAdjustment” (➜ below).Picture AdjustmentContrast: Increases the contrast between light anddark parts of the picture.Brightness: Brightens the picture.Sharpness: Adjusts the sharpness of the edges ofhorizontal lines.Color (or Colour): Adjusts the shade of the picture’scolor.Gamma: Adjusts the brightness of dark parts.Depth Enhancer: Reduces the rough noise in thebackground to give a greater feelingof depth.VideoOutputModeTo select suitable picture quality with yourtelevision(Video recordings will be converted to, and output as,high-definition video.)When HDMI connection is being used and “VideoOutput” (➜ page 27, “HDMI” tab) is set to “On”§480p/576p/720p (progressive)§1080i (interlace)≥ Select a video output with an “¢” mark. The “¢” markshows that the video output is acceptable with yourtelevision.≥ Selecting a video output without an “¢” mark canresult in the picture being distorted.If the picture is distorted, press and hold [CANCEL]until the picture is displayed correctly. (The output willreturn to “576p” or “480p”.)≥ Output from the COMPONENT VIDEO OUTterminals will be “576p” or “480p”.When HDMI connection is not being used and “VideoOutput” (➜ page 27, “HDMI” tab) is set to “Off”§480p/576p (progressive)§480i/576i (interlace)When you select “xxx§p” (progressive) and aconfirmation screen appears, select “Yes” only ifconnecting to a progressive output compatibletelevision.§ The numbers displayed depend on the disc beingplayed. One of the above numbers is displayed.