14Advanced Connections (continued)Connecting a Cable Box,Satellite Receiver, and VCRto the Hard Disk Recorder1. Connect an A/V cable from the AUDIO/VIDEOOUT jacks on your cable box to the INPUT jackson the Hard Disk Recorder, matching like colors.2. Connect an A/V cable from the AUDIO/VIDEOOUT jack on your satellite receiver to the INPUTjack on the Hard Disk Recorder, matching likecolors.3. Connect an A/V cable from the OUTPUT jackson the Hard Disk Recorder to the AUDIO/VIDEOIN jacks on your VCR, matching like colors.4. Connect a second A/V cable from the OUTPUTjacks on the Hard Disk Recorder to the AUDIO/VIDEO IN jacks on your television, matching likecolors.5. Connect an A/V cable from the OUTPUT jackson your VCR to the AUDIO/VIDEO IN jacks onyour television, matching like colors.6. Attach your cable box and satellite receivercontrollers. See “Satellite Receiver and CableBox Controllers” on page 10.7. Follow the C ~ E instructions on page 9 fortelephone connection, AC power connection,and setup.NOTES• If your cable box does not have A/V OUT jacks,connect an RF cable from the OUT jack to theANT/CATV IN jack on the Hard Disk Recorder.• Refer to your TV, cable box, satellite receiver, orVCR owner’s manual for more information onconnecting to these components.AUDIO VIDEOR LVHF/UHFININS-VIDEOAUDIOINPUT OUTPUTANT/CATVVIDEOS-VIDEOR L AUDIO VIDEOR LINS-VIDEOOUTIN TEL LINEAC-INSERIALCONTROLIRBLASTERPORTAUDIO VIDEOR LINOUTINOUTAUDIO VIDEOR LIN OUTS-VIDEOAUDIO VIDEOR LINSERIALVHF/UHF INVHF/UHF OUTLINE12TVHard Disk RecorderVCRSatellite ReceiverCable BoxORPanaHDR P01-.p65 00/12/01, 16:3714