198 The Hard Disk Recorder calls the ReplayTV Serviceto retrieve local telephone numbers and TV channels.• You are notified of the progress of the connection, and if anyerrors occur during the connection.• This connection to the ReplayTV Service lasts about 5 minutes.• The internal Hard Disk Recorder clock and time zone are setduring this connection.• This connection also provides the Hard Disk Recorder with TVchannel information for your local area.PLAYREWContinued on the next page.9 Press / to selectyour local number, thenpress PLAY to move tothe next screen.• The ReplayTV Servicefinds local phone numbersbased on the informationyou provided.• You can change the number later by pressing MENU andselecting “Setup” and then “Change Dialing & Input Settings.”If the connection failed,Press PLAY to try connecting again.Or, press REW repeatedly to return to the previous screen andconfirm each setting item. Then, re-enter the correct information.10 Press / to selectthe dialing method, thenpress PLAY to move tothe next screen.• Choose the dialing methodfor your area. For example,a direct call, or if you needto dial a prefix and/or areacode.11 Press / to selectthe device you haveconnected to the LINE1 input, then pressPLAY to move to thenext screen.• If nothing is connected toLINE 1, just press PLAY./buttons7 Press Number buttonsto enter the dialing prefix,then press PLAY tomove to the next screen.• Press DISPLAY for *;press ENTER for #; andpress PAUSE for ,.• Some telephone systems must dial a special number prior toplacing a phone call, to disable call waiting for example. If yourphone system requires a special number, enter it on this screen.Numberbuttons7ENTERPAUSEDISPLAY91011791011If you select any components, the setup screen appears.Refer to “Completing the IR Blaster Setup” section on page 21.• “Other” is reserved for future devicesthat may be connected to the HardDisk Recorder.NOTEMENUPanaHDR P01-.p65 00/12/01, 16:3719