Panasonic ShowStopper PV-HS3000 Operating Instructions Manual

Contents

53Specifications & InformationGeneralOperating voltage 120VAC 60HzPower Consumption 29W (Power On)19W (Power Off)TunerMTSInput ConnectorsTuner Type FComposite Phono x 2Audio Phono (L+R) x 2S-Video 4-pin miniature DINOutput ConnectorsComposite Phono x 2Audio Phono (L+R) x 2S-Video 4-pin miniature DINTelephone RJ-11, 2wireSerial Control DB-9IR BlasterDimensions/WeightHeight 76mmWidth 430mmDepth 290mmWeight (net) 5.9kgAudio/Video SignalsAudio output level 2.0Vp-pVideo output level 1.0Vp-pVideo output impedance 75 ohmOperating/Storage ConditionsOperating temp. range +5°C to +40 °CStorage temp. range -20°C to +55°C for 100 hoursRecordHDD Capacity 20.4GBVideo compression format MPEG2Audio compression format MPEG1 layer2Recording level Extended/Medium/HighRecording time 61.0H/30.5H/20.5H*MODEMSpeed 56kbpsIf the Hard Disk Recorder does not respondwhen you press buttons on the remote, pressand hold the POWER button on the front ofthe unit for 10 seconds. The Hard DiskRecorder will start up in a few moments.The Hard Disk Recorder’s green power LEDdoes not need to be lighted to record shows.If you have a cable box or a satellite receiver,however, these device must remain on for theHard Disk Recorder to record from them.Resetting Hard Disk RecorderSpecifications* Actual available recording time is not maximum because the“Welcome Video” is already recorded in the Replay Guide.To make the most of the available recording time, delete thewelcome video from the Replay Guide or save it to avideotape.When any image is displayed on a televisionscreen for an extended period of time, apermanent mark can remain even after theimage is changed. This is called “screen burnin.” Projection TVs are the most susceptible toscreen burn in. To prevent this, don’t leave theChannel Guide, or any other screen displayedwhen you don’t need to use them. You canalso adjust the brightness of the Hard DiskRecorder screens to help prevent this. See“Change Display Brightness” on page 7.Screen Burn InNOTE• To dismiss the Pause on-screen image from your TVscreen and keep a show paused, press the EXITbutton on the remote control.PanaHDR- P42-.p65 00/12/01, 16:4153