Before usingDiscs and cards24LSQT1025∫ How to hold a disc or cardDo not touch the recorded surface or the terminal surface.∫ If there is dirt on the discClean it with the supplied disc cleaning cloth. Wipe the disc from the centre to the outer edge toremove the dirt. Do not use force when wiping the disc as it may scratch it. Also, do not usesolvents (thinner, water, antistatic agent, detergent etc.).∫ Handling precautions≥ Be careful about scratches and dirt.≥ Do not attach labels or stickers to discs.(This may cause disc warping and un-balanced rotation, rendering it unusable.)≥ Write on the label side of the disc only with a soft, oil-based felt pen. Do not use ballpoint pens orother hard writing implements.≥ Do not use record cleaning sprays, benzine, thinner, static electricity prevention liquids or anyother solvent.≥ Do not use scratch-proof protectors or covers.≥ Do not expose the terminals of the card to water, garbage or dust.≥ Do not drop, stack, or impact discs. Do not place objects on them.≥ Do not use the following discs:– Discs with exposed adhesive from removed stickers or labels.– Discs that are badly warped or cracked.– Irregularly shaped discs, such as heart shapes.≥ Do not place in the following areas:– In direct sunlight.– In very dusty or humid areas.– Near a heater.– Locations susceptible to significant difference in temperature (condensation can occur).– Where static electricity or electromagnetic waves occur.≥ To protect discs and cards, return them to their cases when you are not using them.Disc and card handlingLSQT1025(ENG).book 24 ページ ２００６年２月４日 土曜日 午後６時１０分
