RecordingManual recording functions80LSQT1025(RAM) (-RW‹VR›) (-RW‹V›) (-R) (SD)¬ Rotate the mode dial to select or .1 Set the AUTO/MANUAL/FOCUS switch toMANUAL.The icon shown in the illustration is displayed automatically.2 Move the joystick left or right to select [ ](aperture) or [ ] (shutter speed).3 Move the joystick left or right to make theadjustment.A Shutter speed:≥ The shutter speed closer to 1/8000 is faster.B Iris/Gain value:CLOSE # (F16 to F2.0) # OPEN # (0dB to 18dB)≥ Value closer to [CLOSE] darken the image.≥ Value closer to [18dB] brighten the image.≥ When the iris value is adjusted to brighter than [OPEN], it changes to the gain value.To restore to automatic adjustmentSet the AUTO/MANUAL/FOCUS switch to AUTO.Manual shutter speed/aperture adjustmentShutter Speed: Adjust it when recording fast-moving subjects.Aperture: Adjust it when the screen is too bright or too dark.MNL4/4 NEXTMNL4/4 NEXT1/50 to 1/8000VDR-D300 1/25 to 1/2000VDR-D250 1/25 to 1/500OPENOPEN1/1001001/100OPENMNLBACKAB≥ When setting both the shutter speed and the iris/gain value, set the shutter speed and then set theiris/gain value.∫ Manual shutter speed adjustment≥ Avoid recording under fluorescent light, mercurylight or sodium light because the colour andbrightness of the playback image may change.≥ If you increase the shutter speed manually, thesensitivity lowers and accordingly the gain valueincreases automatically, which may increase thenoises on the screen.≥ You may see vertical lines of light in the playbackimage of a brightly shining subject or highlyreflective subject, but this is not a malfunction.≥ During normal playback, image movement may notlook smooth.≥ When recording in an extremely bright place, thescreen may change colour or flicker. If so adjust theshutter speed manually to [1/50] or [1/100].∫ Manual iris/gain adjustment≥ If the gain value is increased, the noise on thescreen increases.≥ Depending on the zoom magnification, there are irisvalues that are not displayed.LSQT1025(ENG).book 80 ページ ２００６年２月４日 土曜日 午後６時１０分
