PlaybackMotion picture playback84LSQT1025Recorded scenes are grouped by date on this unit.Scenes recorded on the same day can be played back in succession.1 Press the MENU button, then select[ PLAY SETUP] # [ PLAY MODE] #[BY DATE] and press the joystick.≥ When [PLAY MODE] is set to [VIEW ALL], all recorded motionpictures will be played back in succession. ([ ALL] isdisplayed.)2 Select the date for playback, then press thejoystick.The scenes recorded on the same day are displayed as thumbnails.3 Select the scene to be played back.Press the MENU button, then select[ PLAY SETUP] # [ RESUME PLAY] # [ON] andpress the joystick.If playback of a motion picture is stopped, [R] appears on the thumbnailview of the stopped scene.≥ If playback is stopped at any point during a motion picture while[RESUME PLAY] is set to [OFF], the next time the motion picture is played back, it will be fromthe beginning.Playing back motion pictures by date≥ Even if scenes are recorded on the same day, they are grouped separately in the following cases.– When the number of scenes exceeds 99 (RAM) (-RW‹VR›) (-RW‹V›) (-R)– When the disc is removed (-RW‹V›) (-R)– When the [REC ASPECT] setting is changed (-RW‹V›) (-R)– When the disc is repaired (-RW‹V›) (-R)– When the mode dial is switched (-R)– When the power is turned off (-R)Resuming the previous playback≥ The resume position memorized is cleared if youturn off the power or operate the mode dial, but themenu setting is not cleared.LSQT1025(ENG).book 84 ページ ２００６年２月４日 土曜日 午後６時１０分
