Auto SetupQuick Start Guide14Auto SetupSearch and store TV channels automatically. These steps are not necessary if the setup has been completed by your local dealer. Please complete connections (p. 11 - 13) and settings (if necessary) of the connected equipment before starting AutoSetup. For details of settings for the connected equipment, read the manual of the equipment.1 Plug the TV into mains socket and switch on Takes a few seconds to be displayed. If the red LED shows on the TV, press the Standby On / Off switch on theremote control for about 1 second.2 Select your countryCountry SelectionUnited Kingdom Ireland selectsetExample: Example:CH 21 68CH 21 686262621010CBBC ChannelBBC Radio WalesE41062 10Cartoon Nwk29 -33 -BBC1SearchingCH Channel Name TypeFree TVFree TVFree TVFree TVAnalogueAnalogueQualityFree TV: 8 Pay TV: 0 Radio: 0 Data: 0 Analogue: 2Auto Setup - DVB and AnalogueDVB ScanAnalogue ScanThis will take about 6 minutes.CH 5 69626262100100CBBC ChannelBBC Radio WalesE410062 100Cartoon NwkCH29 -CH33 -BBC1CH 1 99 41H: 21SearchingCH Channel Name TypeFree TVFree TVFree TVFree TVAnalogueAnalogueQualityFree TV: 8 Pay TV: 0 Radio: 0 Analogue: 2Auto Setup - DVB and AnalogueDVB ScanAnalogue ScanThis will take about 6 minutes.Auto Setup will start to search for TV channels and store them. Actual number of channels may differ due to channel duplication.0% 100%Sending Preset DataPlease wait!Remote control unavailableIf Q-Link or similar technology (p. 76) compatible recorder with analogue tuner isconnected, analogue channel setting is automatically downloaded to the recorder.(Digital channel setting is not downloaded.) If downloading has failed, you can download later through the Setup Menu.“Q-Link Download” (p. 37) Region selection screen may appear.Channel Sorting by RegionGBR>Best signal quality (All Regions)England Regions>select regionaccess(select repeatedly until you reach theavailable region)