Panasonic Viera TX-L32E5B Operating Instructions Manual

Panasonic Viera TX-L32E5B Operating Instructions Manual Manual pdf 98 page image

On-screen messages | Maintenance98Message Meaning / ActionTimer already expired ! The starting time in Timer Programming has already passed. Set the timercorrectly (p. 48).Timer incorrect ! Set the start and end times in Timer Programming correctly (p. 48).Timer overlap.Press OK to keep, RETURNto edit. Timer programming events are overlapped. Press the OK button to keep theoverlapped setting. [Ext Rec.] is given priority over [Reminder]. When two ormore [Ext Rec.] overlap, the first timer programming event starts and finishesas programmed. The next timer programming event can then start.Tuner LockedPress EXIT to unlock and stoprecording If you want to unlock the tuner, cancel Direct TV Recording (p. 76, 78) or therecording of Timer Programming (p. 48).Unable to download, pleasecheck equipment The tape or disc is active. Stop the equipment and try again. Media Player / NetworkMessage Meaning / ActionCannot read file The file is broken or unreadable.Check applicable data format. (p. 86, 87)No Device Inserted Confirm the SD Card or USB device is inserted correctly.No valid file to play The card has no data.This operation is not possible The selected operation is not available.An internal error occurred. Check the settings. (p. 67 - 70)Cannot read file The file is broken or unreadable. Check applicable data format. (p. 86, 87)Communication with theserver failed. This might be a problem of the media server.Read the manual of the server software.Connection to the server failed. Check the connections and settings. (p. 66 - 70)Server not found There are no available media server on your home network.Check the connections and settings. (p. 66 - 70)The software update is notcompleted. Network download failed. Check the connections and settings. (p. 66 - 70)Ethernet cable not connected Check the connection of the LAN cable. If you use a hub, also check the lighton the hub is lit. The LAN cable might be defective.MaintenanceFirst, remove the mains plug from the socket outlet.Display panel, Cabinet, PedestalRegular care:Gently wipe the surface of the display panel,cabinet, or pedestal by using a soft cloth to clean thedirt or fingerprints.For stubborn dirt:First clean the dust on the surface. Dampen a soft cloth withclean water or diluted neutral detergent (1 part detergent to 100parts water). Wring the cloth and wipe the surface. Finally, wipeaway all the moisture.Caution Do not use a hard cloth or rub the surface too hard, otherwise this may cause scratches on the surface. Take care not to subject the TV’s surfaces to water or detergent. Liquid inside the TV could lead to product failure. Take care not to subject the surfaces to insect repellent, solvent, thinner or other volatile substances. This maydegrade surface quality or cause peeling of the paint. The surface of the display panel is specially treated and may be easily damaged. Take care not to tap or scratch thesurface with your fingernail or other hard objects. Do not allow the cabinet and pedestal to make contact with a rubber or PVC substance for a long time. This maydegrade surface quality.Mains plugWipe the mains plug with a dry cloth at regular intervals. Moisture and dust may lead to fire or electrical shock.