Using Common Interface53Using Common InterfaceThe Common Interface Module menu provides access to software contained on Common Interface (CI) Modules.This TV works only for Pay TV modules complying with CI standard. This function is not available for BskyB’s Sky channels. Video and audio signals may not be output depending on broadcasts or services.Caution Turn off Mains power On / Off switch whenever insertingor removing the CI module. If a view card and a card reader come as a set, firstinsert the card reader, then insert the view card into thecard reader. Insert the module in the correct direction. Remove the CI module from the TV when placing theTV facing upward. This may cause damages to the CImodule and CI slot.Insert or remove completelyCI slotCI moduleRear of the TVInsert the CI module (optional) The features that appear on screen are dependent on the contents of the selected CI module. Follow the instructions that came with the viewing card to tune in the encrypted channels. If encrypted channels donot appear, perform the below to verify the card is recognised by the TV. For more details, read the manual of the CI module, or check with the broadcaster.1 Select DVB(p. 19)2 Display the menu and select [Setup]Setupselectaccess3 Select [System Menu]System Menu Accessselectaccess4 Select [Common Interface]Common Interface Accessselectaccess5 Access Common Interface and follow the on-screen instructionsSlot 1:Common InterfaceModule inserted On-screen instructions may not correspond to the remote control buttons.