Watching TV21HoldFreeze / unfreeze pictureDisplay the selectable settings for the current statusConfirm or change the current status instantly To changeselectaccessselect / changestore[Multi Audio / AD](DVB)Selects between alternativelanguage or Audio Description forsound tracks (if available) Set Audio Description [Auto] in theSound Menu (p. 36) to select theaudio description sound track. Infreesat mode, Audio Descriptioncannot be controlled separatelyfrom the audio description soundtrack. This setting is not memorisedand it will return to the defaultsetting once you exit the currentprogramme.[Audio Description](DVB)Set to [Auto] if the programme hasAudio Description service, then youwill hear an additional audio track todescribe events on screen To adjust the volume for AudioDescription[Audio Description Menu](p. 36)[Multi Audio] (DVB)Selects between alternativelanguage for sound tracks (ifavailable) This setting is not memorisedand it will return to the defaultsetting once you exit the currentprogramme.[Voice Guidance Settings]Guidance settings for visuallyimpaired users (p. 36)[Monaural Audio] (DVB)Selects stereo / monaural (ifavailable) This setting is not memorisedand it will return to the defaultsetting once you exit the currentprogramme.[Subtitle Language] (DVB)Selects the language in whichsubtitles should appear (if available) This setting is not memorisedand it will return to the defaultsetting once you exit the currentprogramme.[Teletext Character Set]Sets the teletext language font(p. 38)[Teletext Language](DVB)Selects between alternative languagefor teletext (if available)[NICAM] (Analogue)Switches NICAM sound (if available)(p. 35)[Volume Correction]Adjusts volume of individual channelor input modeOff TimerTurn the TV to Standby mode automatically after a fixed periodPress the button repeatedly until you reach the desired time.([Off] / [15] / [30] / [45] / [60] / [75] / [90] (minutes)) To cancel, set to [Off] or turn the TV off. To confirm the remaining time “Display Information banner” (p. 20) When the remaining time is within 3 minutes, the remaining time will flash on the screen. You can also set the [Off Timer] via the [Timer] menu (p. 36)