Using TV Guide●Basic21View details of the programme (DVB mode)Select the programme View details Wed 28.10.200910:46Timer Programming RETURNEXITWed 28.10.2009DIY SOSBBC ONE20:00 - 20:30, 30 min.TV Guide: LandscapeReturn to listDetailsPress again to return●to TV Guide.selectTimer Programming (DVB mode)Timer Programming is a timer to remind watching or record the programme to the external recorderor the USB HDD.Select theforthcomingprogrammeselectsetSelect the function(Ext Rec., USB HDD Rec. or Reminder)LEDLED will turn to orange ifTimer Programming is set.(Orange LED will flash if the recordingof Timer Programming is in progress.)Timer Programming Wed 28.10.2009 10:461D BBC ONEWed 28.10.2009 20:00 20:30Date Start End--- --/-- --:-- --:----/-- --:-- --:----- --/-- --:-- --:----- --/-- --:-- --:----/-- --:-- --:--(30 min.)(--- min.)(--- min.)(--- min.)(--- min.)---Ext Rec.------------Channel NameFunction No.(Timer Programming screen)selectstoreExt Rec. /USB HDD Rec.: to record the programme to the external recorder (Ext Rec.) or theUSB HDD (USB HDD Rec.)When the start time comes, the channel will be switched automaticallyand the video and audio signals will be output. 2 mins. before the startingtime, a reminder message appears if you are watching TV.Reminder : to remind watching the programmeWhen you are watching TV, a reminder message appears 2 mins. beforethe start time. Press the OK button to switch to the programmed channel.To check / change / cancel a timer programming event■ “Timer Programming” (p. 45)To return to TV Guide■ BACK/RETURNIf you select the current programme■A confirmation screen whether you wish to watch or record it will appear.Select “Timer Programming” and set “Ext Rec.” or “USB HDD Rec.” torecord from the time you finish the timer programming event setting. ViewDas Erste19:30- 20:00Timer ProgrammingselectaccessNoteThis function is not available in Analogue mode.●Timer Programming only works reliably if correct time information is received via the signal from the●broadcaster or service provider.No other channel can be selected while the recording of Timer Programming is in progress.●When recording programmes to the external recorder, be sure to make the proper settings on the recorder●connected to the TV.If a compatible recorder with Q-Link, VIERA Link or similar technologies is connected to the TV (p. 78 andp. 79) and the “Link Settings” (p. 30) are completed, no setting of the recorder is required. Also read themanual of the recorder.When recording programmes to the USB HDD, be sure to register the USB HDD and enable it for recording in●the “USB HDD Setup” (p. 54).View advertisementDepending on the country you select, this TV supports the GUIDE Plus+ system in DVB-T orAnalogue modeThe postcode entry or update is required. Follow the on screen instructions.Also possible to setup manually from the Setup Menu● “Update” / “Postcode” in “GUIDE Plus+ Settings” (p. 33)Enter your postcode when using this function for the first time. If you enter an incorrect postcode for your●area, or no postcode is entered, advertisements may not be displayed correctly.Display advertisement informationOPTION To display the latest advertisement● “Update” in “GUIDE Plus+ Settings” (p. 33)To change advertisements■ To return to TV Guide■ OPTIONorBACK/RETURNNoteTo update the information continuously, the TV must be left in Standby mode at night.●Other useful functions■
