Link Functions●(Q-Link / VIERA Link) Advanced83Features available■ (Using VIERA Link Menu)NoteThese functions may not work properly depending on the connected equipment.●Image or sound may not be available for the first few seconds when Input mode is switched.●Easy playback may be available by using the remote control for Player theatre, Blu-ray Disc theatre or Amplifier.●Read the manual of the equipment.“HDAVI Control 5” is the newest standard (current as of December, 2009) for HDAVI Control compatible●equipment. This standard is compatible with conventional HDAVI equipment.To confirm this TV’s version of HDAVI Control● “System Information” (p. 33)Speaker control Speaker SelectionYou can control the theatre speaker with this TV remote control (point the remote control at the TV’ssignal receiver).If you cannot operate, check the settings and the equipment● “Summary of Q-Link and VIERA Link features” (p. 76 and p. 77), “Preparations” (p. 79)Access and control the speaker volumeTV1 Display “VIERA Link Menu”2 Select “Speaker Selection”VIERA Link MenuPause Live TV StartDirect TV RecVIERA Link ControlSpeaker SelectionStartRecorderHome Cinema select3 Set to “Home Cinema” or “TV”setHome Cinema■Player theatre, Blu-ray Disc theatre or Amplifier will beautomatically turned on if it is in Standby mode and the sound isfrom theatre speakers connected to the equipment.Volume up / down●Mute●The sound of TV speakers is mute.●When the equipment is turned off, TV speakers will be active.●TV■TV speakers are active.NoteIf you wish to enjoy the multi-channel sound (e.g. Dolby Digital 5.1ch) via an●Amplifier, connect with HDMI cable and Optical digital audio cable (p. 77), andthen select “Home Cinema”. If your Amplifier has “HDAVI Control 5” function, youcan connect only with HDMI cable. In this case, connect your Amplifier to the TV’sHDMI2 terminal.To enjoy the sound from the DIGA Recorder in multi-channel sound, connect anHDMI cable from the DIGA Recorder to the Amplifier (p. 77).