Panasonic Viera TX-L37V20E Operating Instructions Manual

Also see for TXL32D25E: Operating instructions

Contents

Frequently Asked Questions● Technical Information● FAQs, etc.91FAQsBlock noise, frozen ordisappearing image occursin DVB mode / White spotsor shadow image (ghosting)occurs in Analogue mode /Some channels cannot betunedKeep the space between the TV and RF cable.●Check the position, direction and connection of●the aerial or dish.Check “Signal Condition” (p. 42). If “Signal●Quality” is displayed in red, the DVB signal isweak.Weather conditions will affect signal reception●(heavy rain, snow, etc.), in particular in poorreception areas. Even during good weather,the high pressure can cause poor reception ofsome channels.Due to the digital reception technologies●involved, quality of the digital signals may berelatively low in some cases, despite goodreception of analogue channels.Turn the TV off with the Mains power On / Off●switch, and then on again.If problem persists, consult your local dealer or●service provider for the availability of services.DVB-S Auto Setup cannotbe done completelyCheck connections and dish alignment. (p. 35)●If the problem persists, consult your local dealer.●Neither image nor sound isproducedIs the TV in AV mode?●Check the correct AV input mode is selected.●Check the mains lead is plugged into the●socket outlet.Has the TV been turned On?●Check the Picture Menu (p. 28) and volume.●Check all required cables and connections are●firmly in place.Auto aspectAuto aspect is designed to provide you with the●best ratio to fill the screen. (p. 86)Press the ASPECT button if you would like to●change the aspect ratio manually (p. 18).S-Video / black and whitepictureCheck that the output of the external equipment●matches the input of the TV. If the output of theexternal equipment is set to S-Video, the TVmust also be set to S-Video (p. 24).No programmes shown on TVGuideCheck the digital transmitter.●Adjust the direction of the aerial or dish to another●transmitter installed nearby.Check the analogue broadcast.●If the image quality is poor, check the aerial and consultyour local dealer.Input mode, i.e. EC/AV1 remainson the screenPress the● button to clear these.Press again to redisplay.Q-Link function does not workConfirm SCART cable and connection.●Also set “AV1 / AV2 out” in the Setup Menu (p. 30).“VIERA Link” function doesnot work and an error messageappearsConfirm the connection. (p. 76 and p. 77)●Turn the connected equipment on and then switch the●TV on. (p. 79)Recording does not startimmediatelyCheck the settings of the recorder. For details, read the●manual of the recorder.There may be red spots, bluespots, green spots and blackspots on the screenThis is a characteristic of liquid crystal panels and is●not a problem. The liquid crystal panel is built with veryhigh precision technology giving you fine picture details.Occasionally, a few non-active pixels may appear onthe screen as a fixed point of red, green, blue or black.Please note this does not affect the performance ofyour LCD.Before requesting service or assistance, please follow these simple guides to resolve the problem.If the problem still persists, please contact your local Panasonic dealer for assistance.