Panasonic Viera TX-L42DT50B Operating Instructions Manual

Also see for TX-L42DT50B: Operating instructions

Contents

On-screen messages116Message Meaning / ActionRecording this channel now ● The recorder is recording the programme from its own tuner. You can turn theTV off and leave the equipment recording in the normal way.Reset to Factory ShippingCondition Completed. TV willautomatically restart. Do notturn off● [Auto Setup] will automatically start (p. 16).Sending Preset Data ● Q-Link or VIERA Link channel download is in progress.Software successfully updated.Press EXIT to continue. ● The software updating is finished.Software update failed. Pleasetry again later.Press EXIT to continue.● Perform [System Update Search Now] in System Update (p. 66).If this is still unsuccessful, there may not be any new software available.The device is not directlyconnected to the TV.The device may not workcorrectly.● Please do not connect the device via a USB HUB.This device will be formattedand all contents deleted. Areyou sure?● Once you format the USB HDD, all the recorded programme will be erased.This timer will not follow theTV Guide information.Press OK to continue, RETURNto restore original timer.● If you edit the start time or end time of Guide link programming by more than10 minutes, it will no longer be performed as Guide link programming. Theprogramming will be performed according to the time setting.Timer already expired ! ● The starting time in Timer Programming has already passed. Set the timercorrectly (p. 60).Timer incorrect ! ● Set the start and end times in Timer Programming correctly (p. 60).Timer overlap.Press OK to keep, RETURNto edit.● Timer programming events are overlapped. Press the OK button to keep theoverlapped setting. [Ext Rec.] and [USB HDD Rec.] are given priority over[Reminder]. When two or more [Ext Rec.] / [USB HDD Rec.] overlap, the firsttimer programming event starts and finishes as programmed. The next timerprogramming event can then start.Tuner LockedPress EXIT to unlock and stoprecording● If you want to unlock the tuner, cancel Direct TV Recording (p. 94, 96), therecording of Timer Programming (p. 60) or One Touch Recording.Unable to download, pleasecheck equipment ● The tape or disc is active. Stop the equipment and try again.3D image not available. ● You may use a function not available for 3D effect. Exit the function to view the3D images.■ Media Player / NetworkMessage Meaning / ActionAn internal error occurred. ● Check the settings. (p. 85 - 88)Cannot read file ● The file is broken or unreadable. Check applicable data format. (p. 104, 105)Communication with theserver failed.● This might be a problem of the media server.Read the manual of the server software.Connection to the server failed. ● Check the connections and settings. (p. 84 - 88)Ethernet cable not connected● Check the connection of the LAN cable. If you use a hub, also check the lighton the hub is lit.● The LAN cable might be defective.No Device Inserted ● Confirm the SD Card or USB device is inserted correctly.No valid file to play ● The card has no data.Server not found ● There are no available media server on your home network.Check the connections and settings. (p. 84 - 88)The software update is notcompleted. ● Network download failed. Check the connections and settings. (p. 84 - 88)This operation is not possible ● The selected operation is not available.