Panasonic Viera TX-L42DT50B Operating Instructions Manual

Also see for TX-L42DT50B: Operating instructions

Contents

USB HDD Recording72One touch direct TV recording - What you see is What you record [One Touch Recording]Records the current programme in the USB HDD immediately.● Confirm the code of the remote control is “73” (p. 34).Select the maximum recording time [30] / [60] / [90] / [120] / [180] (minutes)Recording SetupOne Touch Recording 180 minutesselectaccess / store● LED will turn to orange (flash) while OneTouch Recording is in progress.“Indicator / Control panel” (p. 12)■ To start One Touch RecordingStart ● No other channel can be selected while the recording is in progress.■ To stop recording on the wayor■ To play back or delete the recorded contents “Recorded TV mode” (p. 79)● Even if One Touch Recording is in progress, you can play back all the contents. (Depending on the USB HDD, it maynot be available or the recording may not work properly while playback.)Record constantly [Rewind LIVE TV]Records the current programme constantly.● Confirm the code of the remote control is “73” (p. 34).Select [Auto] to start [Rewind LIVE TV]Recording SetupRewind LIVE TV Autoselectaccess / store● When you select [Auto], the recording willstart automatically.● This recording will not start if the otherrecording is in progress, TV signal conditionis bad or any images are not displayed.■ To operate [Rewind LIVE TV]● To pause ● To search backward (up to 90 minutes)● After pausing or searching backward, the following buttons are available to operate.Search backwardPlayback / PauseReturn to the current programmeSearch forwardSearch backward /forwardPause /Playback Playback Return to thecurrent programme■ To stop [Rewind LIVE TV]Rewind LIVE TVRecording SetupOffAutoselect [Off] ● If you stop [Rewind LIVE TV], the recordedcontent for [Rewind LIVE TV] will be deleted.● [Rewind LIVE TV] will be stopped and the recorded content deleted automatically in the following conditions:(Even if [Rewind LIVE TV] stops for the following conditions, as long as the setting is [Auto], the new recording willstart automatically in a condition that makes the recording available.)• Selected other channels• Selected locked channel• Selected invalid channel• No TV signal• When the other recording starts• When the TV is turned to Standby or off