Timer Programming61: freesat / D : DVB / A : Analogue / S : Other Sat.D: DVB / A: Analogue / S: Satellite● You cannot change the mode within the menu.72 BBC 2W 20:00 21:3014 E4STTL21:00 22:001 BBC ONEDIY SOSThe BillBBC ONE22:45 23:0010:30 11:30------ --:----:-- --:--S/PGuideDDDDTimer ProgrammingFunction No. Date Start EndChannel NameWed 26 Oct 2011 10:46Ext Rec.Ext Rec.ReminderExt Rec. Wed 26 Oct(90 min.)(60 min.)(60 min.)(15 min.)Wed 26 OctWed 26 OctThu 27 Oct1 Channel number: Overlapped timer programming events3 Starting time4 Ending timeTimer programming - Programmes according to the time setting2 Dateone day aheaddaily or weekly (press repeatedly)● [Daily Sun-Sat]: Sunday to Saturday● [Daily Mon-Sat]: Monday to Saturday● [Daily Mon-Fri]: Monday to Friday● [Weekly Sat/Fri/Thu/Wed/Tue/Mon/Sun]:Same time on the same day every weekRecords with subtitles (if available)● To indicate this(yellow) ( Press again to remove subtitles)Duration (automatic display)Guide : Guide link programming - Programmes according to the TV Guide signal (p. 28)S/P : Split Programme programming (p. 28)● These functions are not available in Analogue mode or Other Sat. mode.Guide link programming is Timer Programming which is controlled by information from the TV Guide; if programmestart and end times are changed by the broadcaster, the timer programming event will follow the change.A Split Programme programming is a Guide link programming which is interrupted by one or more otherprogrammes. Note that Guide link programming (including Split Programme programming) only works reliably ifcorrect information is received from broadcasters.■ To edit a timer programming eventSelect the event● To change a timer programming eventCorrect as necessary (p. 60)● To delete a timer programming event(red)● To record with subtitles (if available)(yellow) • Each time pressed:auto off● To cancel a timer programming event temporarily(blue) • Each time pressed:cancel stop cancelling■ To unlock the tuner and stop recording ■ To view details of the programming (only forGuide link programming)Select the programme● Press again to return toTimer Programming menu.Note● Check that the LED is orange. If not, timer programming events are not active or not stored.● Timer Programming reminder messages will remain displayed until one of the following occurs:• You press the OK button to view the programme or the EXIT button to cancel the reminder.• The timer programming event that the reminder is set for ends.● “!” identifies that two or more timer programming events are overlapped. [Ext Rec.] and [USB HDD Rec.] are givenpriority over [Reminder].As for the overlapped recording events, the first event starts and finishes as programmed. The next event can thenstart.● The recording of Timer Programming will automatically change to the programmed channel a few seconds before thestart time.● To stop recording the timer programming event, it may be necessary to stop the recorder manually.● The recording of Timer Programming will be performed even if the TV is in [Rewind LIVE TV] recording (p. 72) or[Pause Live TV] recording (p. 97). In this case, [Rewind LIVE TV] recording or [Pause Live TV] recording will becancelled.
