Panasonic Viera TX-L42DT50B Operating Instructions Manual

Also see for TX-L42DT50B: Operating instructions

Contents

Auto SetupQuick Start Guide172 ● Region selection screen may appear.Channel Sorting by RegionGBR>Best signal quality (All Regions)England Regions>select regionaccess(select repeatedly until you reach the available region)3 Setup the network connectionSetup the network connection to enable the network service functions such as VIERA Connect, etc. (p. 20, 91).● Please note that this TV does not support wireless public access points.● Ensure the network connections (p. 15) and network environment are completed before starting setup.Select the network typeNetwork SetupSelect Wired or WirelessWired Wireless Set later[Wired] “Wired connection” (p. 15)[Wireless] “Wireless connection” (p. 15)selectaccess● To setup later on or skip this stepSelect [Set later] or■ [Wired]1. Select [Auto]Check network cable connection.Check acquired IP address.Check for devices using same IP address.Check gateway connection.Check server connection for VIERA Connect.Connection Test : succeededThe test is successfuland the TV isconnected to thenetwork.: failedCheck the settings andconnections. And thenselect [Retry].Acquire IP AddressAuto Manualselectaccess Automatically setup is done and the test of thenetwork connection starts.● To set manually, select [Manual] and set each item.For details (p. 86)2. Go to the next step(Press twice)■ [Wireless]Access points found automatically are listed.1. Select your desired access point123Access Point AAccess Point BAccess Point C11n(2.4GHz)11n(5GHz)11n(5GHz)Available Wireless NetworksNo. Network Name(SSID) StatusWireless typeselectaccess● For [WPS(Push button)] (p. 18)(red): Encrypted access point● To search access points again(blue)● For the information of the highlightedaccess point● To set manually (p. 88)(yellow)2. Access the encryption key input modeEncryption Key SettingSecurity type : WPA-PSKEncryption type : TKIPPlease input the encryption key.Encryption keyConnection will be made with the following settings:-Network Name(SSID) : Access Point A● If the selected access point is not encrypted, the confirmationscreen will be displayed. It is recommended to select theencrypted access point.