Panasonic Viera TX-L42DT50B Operating Instructions Manual

Also see for TX-L42DT50B: Operating instructions

Contents

Using Media Player81● To repeat between the starting point “A” and finishing point “B” ● To the previous / next chapter(red) / (green)• A recorded content is automaticallydivided into chapters (about 5 minutesfor each).Set “A” and “B” in order(blue) • The points will be reset by pressing this buttonagain or other operations.● To change aspect ● To display the subtitle (if available)● To confirm or change the current status (if available)“Display the selectable settings for the current status” (p. 23)■ Chapter ListYou can start playback from the chapter list you select.● The chapter list is not displayed while the selected content is being recorded.To play back from the chapter list(yellow)00:00:00 00:05:00Chapter ListselectplaybackNote● Depending on the recorded programmes, some playback operations may not work properly.■ To change the deviceYou can change to the other device directly in the same mode if two or more devices are connected.1 Display theoption menu2 Select [Drive Select]Option MenuCreate GroupRelease GroupDrive SelectContents SelectChange Protect Statusselectaccess3 Select the device to accessUSB HDD1 USB Flash...Drive SelectUSB HDD1EXITSelectRETURNAccess SD CardselectaccessIf you select the device to play back photos, videos or music,change to the appropriate content.● To change the contentselect [Contents Select]accessAudio output SettingsYou can enjoy the multi-channel sound via an amplifier connected to DIGITAL AUDIO OUT or HDMI2 (ARC function)terminal.● To confirm or change the current sound status (p. 79)1 Display the menu and Select [Sound]Soundselectaccess2 Select [SPDIF Selection] and set2/2SPDIF SelectionReset to DefaultsAutoResetselectaccess / storeMenu Item Adjustments / Configurations (alternatives)SoundSPDIF SelectionSPDIF: A standard audio transfer file formatSelects the initial setting for digital audio output signal from DIGITAL AUDIO OUTand HDMI2 (ARC function) terminals [Auto] / [PCM][Auto]: Dolby Digital Plus, Dolby Digital and HE-AAC multi-channel are output asDolby Digital Bitstream. DTS is output as DTS. MPEG is output as PCM.[PCM]: Digital output signal is fixed to PCM.