Panasonic Viera TX-P42UT50B Operating Instructions Manual

On-screen messages100Message Meaning / ActionInvalid system time. Pleaseexit !● Cannot get the time information and cannot edit Timer Programming screen.Check the connection of the RF cable.Invalid system time, TimerProgramming will not work.Please press TV button onremote control and check timedisplay on Banner● Cannot get the time information. If there is no time displayed on the Informationbanner, check the connection of the RF cable.Max. number of timers alreadyset ! ● The maximum number of timer programming events is 15.New channels found!Press OK to update channellist.Press EXIT to ignore.● There may be new channels available.● This message will appear each time a change is made by the broadcasters.This message can be deactivated by setting [New Channel Message] to [Off] in[DVB Tuning Menu].Selecting OK will perform [Update Channel List].No channel found.Please check aerial or localsignal availability.Press OK to start Auto Setup.● Follow the on-screen instructions.● Please also refer to p. 97.● If channels are still not found, consult your local Panasonic dealer.No module inserted ● Check the CI module is inserted completely (p. 59).No recording - Alreadyrecording ● The equipment may already be recording.No recording - Check media ● The tape or disc may be “write protected”, full, missing or damaged.No recording - Playing ● The equipment may be playing the tape or disc.No recording - Unknownreason ● The recording may not be performed. Check the equipment.No service ● The broadcaster has stopped the service. Check the channel in the TV Guide.(p. 25)No signal ● The TV cannot detect the signal. Check the connection of the RF cable.Overcurrent error on USBdevice occurred.Please remove the USB device,and switch off the TV by mainspower switch.● The connected USB device might cause overcurrent error. Follow the on-screen instructions.● Check if foreign objects are inside the USB port.PIN incorrect! ● The PIN number you entered is wrong.Please check settings andconnections on HDMI devices. ● Communication error in VIERA Link function (p. 82).Please wait. ● A function is in progress.Recording this channel now ● The recorder is recording the programme from its own tuner. You can turn theTV off and leave the equipment recording in the normal way.Reset to Factory ShippingCondition Completed. TV willautomatically restart. Do notturn off● [Auto Setup] will automatically start (p. 16).Sending Preset Data ● Q-Link or VIERA Link channel download is in progress.Software successfully updated.Press EXIT to continue. ● The software updating is finished.Software update failed. Pleasetry again later.Press EXIT to continue.● Perform [System Update Search Now] in System Update (p. 60).If this is still unsuccessful, there may not be any new software available.