Panasonic Viera TX-P42UT50B Operating Instructions Manual

On-screen messages101Message Meaning / ActionThe device is not directlyconnected to the TV.The device may not workcorrectly.● Please do not connect the device via a USB HUB.This timer will not follow theTV Guide information.Press OK to continue, RETURNto restore original timer.● If you edit the start time or end time of Guide link programming by more than10 minutes, it will no longer be performed as Guide link programming. Theprogramming will be performed according to the time setting.Timer already expired ! ● The starting time in Timer Programming has already passed. Set the timercorrectly (p. 54).Timer incorrect ! ● Set the start and end times in Timer Programming correctly (p. 54).Timer overlap.Press OK to keep, RETURNto edit.● Timer programming events are overlapped. Press the OK button to keep theoverlapped setting. [Ext Rec.] is given priority over [Reminder]. When two ormore [Ext Rec.] overlap, the first timer programming event starts and finishesas programmed. The next timer programming event can then start.Tuner LockedPress EXIT to unlock and stoprecording● If you want to unlock the tuner, cancel Direct TV Recording (p. 81, 83) or therecording of Timer Programming (p. 54).Unable to download, pleasecheck equipment ● The tape or disc is active. Stop the equipment and try again.3D image not available. ● You may use a function not available for 3D effect. Exit the function to view the3D images.■ Media Player / NetworkMessage Meaning / ActionAn internal error occurred. ● Check the settings. (p. 72 - 75)Cannot read file ● The file is broken or unreadable. Check applicable data format. (p. 90, 91)Communication with theserver failed.● This might be a problem of the media server.Read the manual of the server software.Connection to the server failed. ● Check the connections and settings. (p. 71 - 75)Ethernet cable not connected● Check the connection of the LAN cable. If you use a hub, also check the lighton the hub is lit.● The LAN cable might be defective.No Device Inserted ● Confirm the SD Card or USB device is inserted correctly.No valid file to play ● The card has no data.Server not found ● There are no available media server on your home network.Check the connections and settings. (p. 71 - 75)The software update is notcompleted. ● Network download failed. Check the connections and settings. (p. 71 - 75)This operation is not possible ● The selected operation is not available.