Panasonic Viera TX-P42UT50B Operating Instructions Manual

Using Media Player63Starting Media Player1 Insert the SD Card or USB Flash Memory to the TV(p. 62)2 Confirm the message and start Media Player● You can also start by pressing following button.“Watching External Inputs” (p. 31)3 Select the device to accessUSB Drive... USB Flash...Drive SelectSD CardEXITSelectRETURNAccessSelected device nameSD Cardselectaccess● If two or more devices are not connected, this step will be skipped.4 Select the contentPhoto Video MusicContents SelectSD CardEXITSelectRETURNAccessselectaccess[Photo] (p. 64)[Video] (p. 67)[Music] (p. 69)5 Enjoy Media PlayerExample: Thumbnail - [All photos]EXITSelect RETURNSlideshow View Select Drive Select Contents SelectInfoViewOption MenuSD CardMedia Player Photo All photosSelected device name● To display the information of the highlighted content1/48p1010001.JPG23/10/20111600X1200File nameDateSizeFile number / Total file numberNote● You can also access each mode directly by using VIERA TOOLS. (p. 37)● Select the appropriate device and content for playing back each file.● You can use the following buttons during playback. Set the code of the remote control to “73” (p. 32).Change the deviceYou can change to the other device directly in the same mode if two or more devices are connected.1 While the thumbnail is displayed,display the device selection(yellow)2 Select the device to accessUSB Drive... USB Flash...Drive SelectSD CardEXITSelectRETURNAccessSelected device nameSD CardselectaccessChange the contentsYou can switch to the other mode of Media Player from the thumbnail view.● The mode can be switched in the current device.1 While the thumbnail is displayed,display the contents selection(blue)2 Select the contentsPhoto Video MusicContents SelectSD CardEXITSelectRETURNAccessselectaccess