Panasonic Viera TX-P42UT50B Operating Instructions Manual

Link Functions (Q-Link / VIERA Link)86Speaker control [Speaker Selection]You can control the theatre speaker with this TV remote control pointing at the TV’s signal receiver.● If you cannot operate, check the settings and the equipment.“Summary of Q-Link and VIERA Link features” (p. 79, 80), “Preparations” (p. 82)1 Display [VIERA TOOLS] and select [VIERA Link]VIERA Linkselectaccess2 Select [Speaker Selection]VIERA Link MenuPause Live TVDirect TV RecVIERA Link ControlSpeaker SelectionStartHome CinemaRecorderStartselectaccess3 Set to [Home Cinema] or [TV]selectstore[Home Cinema]:The sound is from theatre speakers. Player theatre, Blu-ray Disc theatre or Amplifier will be automatically turnedon if it is in Standby mode.● Volume up / down● Mute● The sound of TV speakers is mute.● When the equipment is turned off, TV speakers will be active.[TV]:TV speakers are active.Multi-channel soundIf you want to enjoy the multi-channel sound (e.g. Dolby Digital 5.1ch) via an Amplifier, connect it with HDMI cable andOptical digital audio cable (p. 80), and then select [Home Cinema]. If your Amplifier has “HDAVI Control 5” function,you only need to connect it with HDMI cable to the TV’s HDMI2 terminal.To enjoy the sound from the DIGA Recorder in multi-channel sound, connect an HDMI cable from the DIGA Recorderto the Amplifier (p. 80).Note● These functions may not work properly depending on the connected equipment.● Image or sound may not be available for the first few seconds when input mode is switched.● “HDAVI Control 5” is the newest standard (as of November, 2011) for HDAVI Control compatible equipment. Thisstandard is compatible with conventional HDAVI equipment.● To confirm this TV’s version of HDAVI Control [System Information] (p. 45)