Link Functions (Q-Link / VIERA Link)102Speaker control [Speaker Selection]You can control the home theatre speakers with this TV remote control (point the remote control at the TV’s signal receiver).• If you cannot operate, check the settings and the equipment“Summary of Q-Link and VIERA Link features” (p. 95, 96), “Preparations” (p. 98)1 Display [VIERA Link Menu]2 Select [Speaker Selection]VIERA Link MenuPause Live TVDirect TV RecVIERA Link ControlSpeaker SelectionStartHome CinemaRecorderStartaccessselect3 Set to [Home Cinema] or [TV]storeselect[Home Cinema]The Player theatre, Blu-ray Disc theatre or Amplifier will be automatically turned on if it isin Standby mode and the sound will be output from theatre speakers connected to theequipment.• Volume up / down • Mute• The sound of the TV speakers is muted.• When the equipment is turned off, the TV speakers will be activated.[TV]TV speakers are active.Multi-channel soundIf you wish to enjoy multi-channel sound (e.g. Dolby Digital 5.1ch) via an Amplifier, connect theAmplifier to the TV with an HDMI cable and an Optical digital audio cable (p. 96), and then select“Home Cinema”. If your Amplifier has “HDAVI Control 5” function, you only need to connect withan HDMI cable. In this case, connect your Amplifier to the TV’s HDMI2 terminal.To enjoy the sound from the DIGA Recorder in multi-channel sound, connect an HDMI cablefrom the DIGA Recorder to the Amplifier (p. 96).Note• These functions may not work properly depending on the connected equipment.• Image or sound may not be available for the first few seconds when input mode is switched.• Easy playback may be available by using the remote control for Player theatre, Blu-ray Disc theatre or Amplifier. Read themanual of the equipment.• “HDAVI Control 5” is the newest standard (current as of December, 2010) for HDAVI Control compatible equipment. Thisstandard is compatible with conventional HDAVI equipment.• To confirm this TV’s version of HDAVI Control [System Information] (p. 43)