Panasonic Viera TX-P46GT30B Operating Instructions Manual

How to Use Menu Functions39Menu Item Adjustments / Configurations (alternatives)PictureAdvanced SettingsIntelligent FrameCreationAutomatically compensates the picture frame rate and removes juddering movementsto make the images smooth [Off] / [Mid] / [Max]• Depending on the contents, images may be noisy. To prevent the noise, change the setting.• This function is not available for selection (default to [Off ]) when [Viewing Mode] isset to [Game] or in the mode of network service operations.24p Smooth FilmAutomatically compensates the picture frame rate to make the 24p source movieimages smooth [Off] / [Mid] / [Max]• This is available only for 24p signal input and displayed instead of [Intelligent Frame Creation].• This function is not available for selection (default to [Off ]) when [Viewing Mode] isset to [Game] or in the mode of network service operations.Clear Cinema Improves vertical resolution for movie images [Off] / [On]• This function is available for the interlaced signal (except when [Viewing Mode] is set to [Game]).3D Refresh RateReduces juddering and flicker noises of the 3D images [Auto] / [100Hz]• If the room is lit by fluorescent lights / dimmers (50 Hz) and light appears to flickerwhen using the 3D Eyewear, set to [100Hz].Resolution EnhancerEnhances the picture resolution to make the image sharper [Off] / [Mid] / [Max]• This function is available for SD (Standard definition) signal.• As for HD (High definition) signal, this function is available when aspect mode is set to[16:9] ([16:9 Overscan] is set to [On]), [4:3 Full] or [Zoom].• Not valid on Media Player and network service operationsSide Panel Increases the brightness of the side panel [Off] / [Low] / [Mid] / [High]• The recommended setting is [High] to prevent panel “image retention”.16:9 OverscanSelects the screen area displaying the image [Off] / [On][On] : Enlarges the image to hide the edge of the image.[Off] : Displays the image in the original size.• Set to [On] if noise is generated on the edge of the screen.• This function is available when aspect is set to [Auto] (16:9 signal only) or [16:9].• This function can be memorized separately for SD (Standard definition) and HD (Highdefinition) signals.• Not valid on VIERA ConnectDVI Input SettingChanges the black level in the image for HDMI input mode with DVI input signal manually[Normal] / [Full]• When the DVI input signal from the external equipment, especially from PC, isdisplayed, the black level may not be suitable. In this case, select [Full].• The black level for HDMI input signal will be adjusted automatically.• For HDMI input mode with DVI input signal onlyPixel OrbiterSelects the mode for wobbling of the image to prevent panel “image retention”[Auto] / [On][Auto] : Automatically works only for the appropriate images and you rarely recognisethe wobbling.Scrolling Bar Scrolls the vertical bar to prevent panel “image retention”• Press the OK button to start scrolling and press any buttons (except Standby) to exit this mode.Reset to Defaults Press the OK button to reset the present Picture Viewing Mode to the default settingsSoundModeSelects the basic sound mode [Music] / [Speech] / [User]• The selected mode affects all input signals.[Music] : Improves sound quality for watching music videos, etc.[Speech] : Improves sound quality for watching news, drama, etc.• Music and Speech modes use CONEQ™ brand equalization technology to improvesound quality. CONEQ equalizes acoustic power frequency response and corrects timeand phase alignment errors of a speaker system. Speakers with CONEQ perform asnear-perfect electro-acoustic transducers providing true to the original sound withthe highest musically and intelligibility.• In Music and Speech modes, you can adjust [Bass] and [Treble] settings, and thosesettings will be stored for each mode.[User] : Adjusts the sounds manually by using the equaliser to suit your favourite sound quality.• For the User mode, [Equaliser] will appear on the Sound Menu instead of [Bass] and[Treble]. Select the [Equaliser] and adjust the frequency. [Equaliser] (p. 40)Bass Increases or decreases level to enhance or minimise lower, deeper sound outputTreble Increases or decreases level to enhance or minimise sharper, higher sound output