USB HDD Recording71■ To start One Touch RecordingSet the position to “TV” StartDVD/VCR TV REC• No other channel can be selected while the recording is in progress.■ To stop recording on the wayDVD/VCR TVorGUIDEEXIT■ To playback or delete the recorded contents “Recorded TV mode” (p. 80)• Even if One Touch Recording is in progress, you can playback all the contents. However, the recording may not work properlywhile playback.Record constantly [Rewind LIVE TV]Recording the currently viewed channel constantly.Select [Auto] to start Rewind LIVE TVUSB HDD SetupOne Touch RecordingRewind LIVE TVRecording SetupAuto180 minutes access / storeselect• When you select [Auto], the recording will start automatically.• If the other recording is in progress, TV signal condition is bad or when any imagesare not displayed, this recording will not start.■ To operate the Rewind LIVE TVSet the position to “TV”DVD/VCR TV• To pause • To search backward (up to 90 minutes)(Press and hold)• After pausing or searching backward, the following buttons are available to operate.search backwardplayback / pausesearch forwardstop (stops the current operation andgoes back to live TV)search backward /forwardpause /playback playback stop(Press and hold) stops the currentoperation andgoes back tolive TV■ To stop the Rewind LIVE TVUSB HDD SetupOne Touch RecordingRewind LIVE TVRecording SetupOffAutoselect [Off ]• If you stop the Rewind LIVE TV, the recorded content for the Rewind LIVE TV willbe deleted.• Rewind LIVE TV will be stopped and the recorded content deleted automatically in the following conditions :(Even if Rewind LIVE TV stops for the following conditions, as long as the setting is [Auto], the new recording will startautomatically in a condition that makes the recording available.)• selected other channels• selected locked channel• selected invalid channel• no TV signal• when the other recording starts• when the TV is turned off or standby