Panasonic Viera TX-P46GT30B Operating Instructions Manual

On screen messages118Message Meaning / ActionReset to Factory ShippingCondition Completed.Please switch off TV.• [Auto Setup] will automatically start when Mains power On / Off switch is nextturned On. (p. 13)Sending Preset Data • Q-Link or VIERA Link channel download is in progress.Software successfully updated.Press EXIT to continue. • The software updating is finished.Software update failed. Pleasetry again later.Press EXIT to continue.• Perform [System Update Search Now] in System Update (p. 65).If this is still unsuccessful, there may not be any new software available.The device is not directlyconnected to the TV.The device may not work correctly. • Please do not connect the device via a USB HUB.This timer will not follow the TVGuide information.Press OK to continue, RETURN torestore original timer.• If you edit the start time or end time of Guide link programming by more than10 minutes, it will no longer be performed as Guide link programming. Theprogramming will be performed according to the time setting.Timer already expired ! • The starting time in Timer Programming has already passed. Set the timer correctly(p. 59).Timer incorrect ! • Set the start and end times in Timer Programming correctly (p. 59).Timer overlap.Press OK to keep, RETURN toedit.• Timer programming events are overlapped. Press the OK button to keepthe overlapped setting. [Ext Rec.] and [USB HDD Rec.] are given priority over[Reminder]. When two or more [Ext Rec.] / [USB HDD Rec.] overlap, the firsttimer programming event starts and finishes as programmed. The next timerprogramming event can then start.Tuner LockedPress EXIT to unlock and stoprecording• If you want to unlock the tuner, cancel Direct TV Recording (p. 97, 99), therecording of Timer Programming (p. 59) or One Touch Recording (p. 70).Unable to download, pleasecheck equipment • The tape or disc is active. Stop the equipment and try again.3D image not available. • You may use a function not available for 3D effect. Exit the function to view the 3Dimages.■ Media PlayerMessage Meaning / ActionCannot read file • The file is broken or unreadable.Check applicable data format. (p. 107, 108)No Device Inserted • Confirm the SD Card or USB device is inserted correctly.No valid file to play • The card has no data.This operation is not possible • The selected operation is not available.■ NetworkMessage Meaning / ActionAn internal error occurred. • Check the settings. (p. 86 - 90)Cannot read file • The file is broken or unreadable.Check applicable data format. (p. 107, 108)Communication with the serverfailed. • This might be a problem of the media server.Read the manual of the server software.Connection to the server failed. • Check the connections and settings. (p. 85 - 90)Server not found • There are no available media server on your home network.Check the connections and settings. (p. 85 - 90)The software update is notcompleted. • Network download failed.Check the connections and settings. (p. 85 - 90)Ethernet cable not connected • Check the connection of the LAN cable. If you use a hub, also check the light on the hub is lit.• The LAN cable might be defective.