114First, remove the mains plug from the socket outlet.Display panel, Cabinet, PedestalRegular care:Gently wipe the surface of the display panel, cabinet, or pedestal by using a soft cloth to clean the dirt or fingerprints.For stubborn dirt:Dampen a soft cloth with clean water or diluted neutral detergent (1 part detergent to 100 parts water). Then wringthe cloth and wipe the surface. Finally, wipe away all the moisture.CautionDo not use a hard cloth or rub the surface too hard. This may cause scratches on the surface.●Take care not to subject the TV’s surfaces to water or detergent more than requires. A liquid inside the TV could●lead to product failure.Take care not to subject the surfaces to insect repellent, solvent, thinner or other volatile substances. This may●degrade surface quality or cause peeling of the paint.The surface of the display panel is specially treated and may be easily damaged. Take care not to tap or scratch●the surface with your fingernail or other hard objects.Do not allow the cabinet or pedestal to make contact with a rubber or PVC substance for a long time. This may●degrade surface quality.Mains plugWipe the mains plug with a dry cloth at regular intervals. Moisture and dust may lead to fire or electrical shock.3D EyewearUse a clean , soft and dry cloth to wipe the 3D Eyewear. Otherwise, dirt or dust may scratch the eyewear.CautionDo not use benzene, thinner, or wax on the 3D Eyewear, as doing so may cause the paint to peel off.●Do not submerge the 3D Eyewear in liquid such as water when cleaning.●Maintenance